target/linux/lantiq/base-files/etc/board.d/02_network

   1 #!/bin/sh
   2 #
   3 # Copyright (C) 2011-2015 OpenWrt.org
   4 #
   5
   6 . /lib/functions/uci-defaults.sh
   7 . /lib/functions/system.sh
   8 . /lib/functions/lantiq.sh
   9
  10 board_config_update
  11
  12 vpi=1
  13 vci=32
  14 annex="a"
  15 tone="av"
  16 xfer_mode=""
  17 encaps="llc"
  18 payload="bridged"
  19 lan_mac=""
  20 wan_mac=""
  21 interface_wan=""
  22
  23 board=$(board_name)
  24
  25 case "$board" in
  26 ACMP252|GIGASX76X)
  27         ucidef_add_switch "switch0" \
  28                 "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5t@eth0"
  29         ;;
  30
  31 ALL0333CJ)
  32         annex="b"
  33         lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
  34         wan_mac=$(macaddr_add "$lan_mac" 1)
  35         ucidef_set_interface_lan 'eth0'
  36         ;;
  37
  38 ARV4510PW)
  39         lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
  40         wan_mac=$(macaddr_add "$lan_mac" 1)
  41         ucidef_add_switch "switch0" \
  42                 "0:lan:4" "2:lan:2" "1:lan:3" "3:lan:1" "5t@eth0"
  43         ;;
  44
  45 ARV4519PW|ARV7510PW22|ARV7518PW|ARV752DPW22|ARV8539PW22)
  46         ucidef_add_switch "switch0" \
  47                 "0t@eth0" "2:lan" "3:lan" "4:lan" "5:lan"
  48         ;;
  49
  50 ARV4520PW)
  51         ucidef_add_switch "switch0" \
  52                 "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5t@eth0"
  53         ;;
  54
  55 ARV7506PW11)
  56         wan_mac=$(macaddr_add "$(mtd_get_mac_binary board_config 22)" 2)
  57         ucidef_add_switch "switch0" \
  58                 "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5t@eth0"
  59         ;;
  60
  61 ARV7519PW)
  62         wan_mac=$(macaddr_add "$(mtd_get_mac_binary board_config 22)" 1)
  63         ucidef_add_switch "switch0" \
  64                 "0:lan" "1:lan" "2:lan" "3:lan" "4t@eth0"
  65         ;;
  66
  67 ARV7519RW22)
  68         wan_mac=$(macaddr_add "$(mtd_get_mac_binary boardconfig 22)" 1)
  69         ucidef_add_switch "switch0" \
  70                 "0:lan:5" "2:lan:3" "3:lan:4" "4:lan:1" "5:lan:2" "6t@eth0"
  71         ;;
  72
  73 ASL56026)
  74         lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
  75         wan_mac=$(mtd_get_mac_ascii uboot_env wanmac)
  76         ucidef_add_switch "switch0"\
  77                 "2:lan" "3:lan" "6t@eth0"
  78         ;;
  79
  80 BTHOMEHUBV2B)
  81         lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
  82         wan_mac=$(macaddr_add "$lan_mac" 1)
  83         ucidef_add_switch "switch0" \
  84                 "1:lan" "2:lan" "3:lan" "4:lan" "5t@eth0"
  85         ;;
  86
  87 BTHOMEHUBV3A)
  88         lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
  89         wan_mac=$(macaddr_add "$lan_mac" 1)
  90         ucidef_set_interface_lan 'eth0'
  91         ;;
  92
  93 BTHOMEHUBV5A)
  94         lan_mac=$(mtd_get_mac_binary_ubi caldata 4364)
  95         wan_mac=$(macaddr_add "$lan_mac" 1)
  96         ucidef_add_switch "switch0" \
  97                 "0:lan:3" "1:lan:4" "2:lan:2" "4:lan:1" "5:wan:5" "6t@eth0"
  98         ;;
  99
 100 DGN3500*)
 101         ucidef_add_switch "switch0" \
 102                 "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5t@eth0"
 103         ;;
 104
 105 DM200)
 106         lan_mac=$(mtd_get_mac_binary ART 0)
 107         wan_mac=$(macaddr_add "$lan_mac" 1)
 108         ucidef_set_interface_lan 'eth0'
 109         ;;
 110
 111 EASY80920NAND|EASY80920NOR)
 112         lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
 113         wan_mac=$(macaddr_add "$lan_mac" 1)
 114         ucidef_add_switch "switch0" \
 115                 "0:lan:4" "1:lan:3" "2:lan:2" "4:lan:1" "5:wan:5" "6t@eth0"
 116         ;;
 117
 118 FRITZ3370)
 119         wan_mac=$(macaddr_add "$(mtd_get_mac_binary urlader 2439)" 1)
 120         ucidef_set_interface_lan 'eth0'
 121         ;;
 122
 123 FRITZ7320)
 124         wan_mac=$(macaddr_add "$(mtd_get_mac_binary urlader 2705)" 1)
 125         ucidef_set_interface_lan 'eth0'
 126         ;;
 127
 128 FRITZ7360SL)
 129         wan_mac=$(macaddr_add "$(mtd_get_mac_binary urlader 2705)" 1)
 130         ucidef_add_switch "switch0" \
 131                 "0:lan:3" "1:lan:4" "2:lan:2" "4:lan:1" "6t@eth0"
 132         ;;
 133
 134 H201L)
 135         ucidef_add_switch "switch0" \
 136                 "0:lan" "1:lan" "2:lan" "3:lan" "4t@eth0"
 137         ;;
 138
 139 P2601HNFX)
 140         ucidef_add_switch "switch0" \
 141                 "0:lan" "1:lan" "2:lan" "3:lan" "5t@eth0"
 142         ;;
 143
 144 P2812HNUF*)
 145         lan_mac=$(mtd_get_mac_ascii uboot-env ethaddr)
 146         wan_mac=$(macaddr_add "$lan_mac" 1)
 147         ucidef_add_switch "switch0" \
 148                 "0:lan" "1:lan" "2:lan" "4:lan" "5:wan" "6t@eth0"
 149         ;;
 150
 151 TDW8970|TDW8980)
 152         wan_mac=$(macaddr_add "$(mtd_get_mac_binary boardconfig 61696)" 1)
 153         ucidef_add_switch "switch0" \
 154                 "0:lan:2" "2:lan:3" "4:lan:4" "5:lan:1" "6t@eth0"
 155         ;;
 156
 157 VG3503J)
 158         lan_mac=$(mtd_get_mac_ascii uboot-env ethaddr)
 159         wan_mac=$(macaddr_add "$lan_mac" 1)
 160         ucidef_add_switch "switch0" \
 161                 "2:lan:1" "4:lan:2" "6t@eth0"
 162         ;;
 163
 164 VR200v)
 165         wan_mac=$(macaddr_add "$(mtd_get_mac_binary romfile 61696)" 1)
 166         ucidef_add_switch "switch0" \
 167                 "0:lan" "2:lan" "4:lan" "5:lan" "6t@eth0"
 168         ;;
 169
 170 VGV7510KW22*)
 171         wan_mac=$(macaddr_add "$(mtd_get_mac_binary board_config 22)" 2)
 172         ucidef_add_switch "switch0" \
 173                 "2:lan:2" "3:lan:1" "4:lan:4" "5:lan:3" "0:wan:5" "6t@eth0"
 174         ;;
 175
 176 VGV7519*)
 177         wan_mac=$(mtd_get_mac_binary board_config 22)
 178         ucidef_add_switch "switch0" \
 179                 "0:lan:4" "1:lan:3" "2:lan:2" "4:lan:1" "5:wan:5" "6t@eth0"
 180         ;;
 181
 182 WBMR)
 183         ucidef_add_switch "switch0" \
 184                 "0t@eth0" "2:lan" "3:lan" "4:lan" "5:lan"
 185         ;;
 186
 187 WBMR300)
 188         lan_mac=$(mtd_get_mac_ascii ubootconfig ethaddr)
 189         wan_mac="$lan_mac"
 190         ucidef_add_switch "switch0" \
 191                 "5:lan:2" "2:lan:3" "3:lan:4" "4:wan:1" "6t@eth0"
 192         ;;
 193
 194 *)
 195         ucidef_set_interface_lan 'eth0'
 196         ;;
 197
 198 esac
 199
 200 ls /lib/modules/$(uname -r)/ltq_atm* 1> /dev/null 2>&1 && \
 201         ucidef_add_atm_bridge "$vpi" "$vci" "$encaps" "$payload"
 202
 203 if lantiq_is_vdsl_system; then
 204         interface_wan="dsl0"
 205         ucidef_add_vdsl_modem "$annex" "$tone" "$xfer_mode"
 206 else
 207         interface_wan="nas0"
 208         ucidef_add_adsl_modem "$annex" "/lib/firmware/adsl.bin"
 209 fi
 210
 211 ucidef_set_interface_wan "$interface_wan" "pppoe"
 212
 213 [ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" "$lan_mac"
 214 [ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" "$wan_mac"
 215
 216 board_config_flush
 217
 218 exit 0
 219