target/linux/lantiq/dts/BTHOMEHUBV5A.dts

   1 /dts-v1/;
   2
   3 #include "vr9.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         model = "BTHOMEHUBV5A - BT Home Hub 5A";
   9
  10         chosen {
  11                 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
  12         };
  13
  14         aliases {
  15                 led-boot = &power_green;
  16                 led-failsafe = &power_red;
  17                 led-running = &power_blue;
  18
  19                 led-internet = &broadband_blue;
  20                 led-wifi = &wireless_blue;
  21         };
  22
  23         memory@0 {
  24                 reg = <0x0 0x8000000>;
  25         };
  26
  27         fpi@10000000 {
  28                 localbus@0 {
  29                         nand-parts@0 {
  30                                 compatible = "gen_nand", "lantiq,nand-xway";
  31                                 lantiq,cs = <1>;
  32                                 bank-width = <2>;
  33                                 reg = <0x1 0x0 0x2000000>;
  34                                 #address-cells = <1>;
  35                                 #size-cells = <1>;
  36
  37                                 partitions {
  38                                         compatible = "fixed-partitions";
  39                                         #address-cells = <1>;
  40                                         #size-cells = <1>;
  41
  42                                         partition@0 {
  43                                                 label = "u-boot";
  44                                                 reg = <0x0 0x40000>;
  45                                                 read-only;
  46                                         };
  47                                         partition@40000 {
  48                                                 label = "uboot-env";
  49                                                 reg = <0x40000 0x40000>;
  50                                         };
  51                                         caldata: partition@80000 {
  52                                                 label = "caldata";
  53                                                 reg = <0x80000 0x20000>;
  54                                                 read-only;
  55                                         };
  56                                         partition@a0000 {
  57                                                 label = "kernel";
  58                                                 reg = <0xa0000 0x200000>;
  59                                         };
  60                                         partition@2a0000 {
  61                                                 label = "ubi";
  62                                                 reg = <0x2a0000 0x7d60000>;
  63                                         };
  64                                 };
  65                         };
  66                 };
  67
  68                 gpio: pinmux@E100B10 {
  69                         pinctrl-names = "default";
  70                         pinctrl-0 = <&state_default>;
  71
  72                         state_default: pinmux {
  73                                 mdio {
  74                                         lantiq,groups = "mdio";
  75                                         lantiq,function = "mdio";
  76                                 };
  77                                 pci_rst {
  78                                         lantiq,pins = "io21";
  79                                         lantiq,output = <1>;
  80                                         lantiq,open-drain;
  81                                 };
  82                                 pcie_rst {
  83                                         lantiq,pins = "io38";
  84                                         lantiq,pull = <0>;
  85                                         lantiq,output = <1>;
  86                                         lantiq,open-drain;
  87                                 };
  88                                 usb_vbus {
  89                                         lantiq,pins = "io33";
  90                                         lantiq,pull = <0>;
  91                                         lantiq,open-drain = <0>;
  92                                         lantiq,output = <1>;
  93                                 };
  94                                 nand_out {
  95                                         lantiq,groups = "nand cle", "nand ale";
  96                                         lantiq,function = "ebu";
  97                                         lantiq,output = <1>;
  98                                         lantiq,open-drain = <0>;
  99                                         lantiq,pull = <0>;
 100                                 };
 101                                 nand_cs1 {
 102                                         lantiq,groups = "nand cs1";
 103                                         lantiq,function = "ebu";
 104                                         lantiq,open-drain = <0>;
 105                                         lantiq,pull = <0>;
 106                                 };
 107                         };
 108                 };
 109
 110                 ifxhcd@E101000 {
 111                         status = "okay";
 112                         gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
 113                 };
 114
 115                 pci@E105400 {
 116                         status = "okay";
 117                         gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
 118                 };
 119         };
 120
 121         gphy-xrx200 {
 122                 compatible = "lantiq,phy-xrx200";
 123                 firmware1 = "lantiq/vr9_phy11g_a1x.bin";        /*VR9 1.1*/
 124                 firmware2 = "lantiq/vr9_phy11g_a2x.bin";        /*VR9 1.2*/
 125                 phys = [ 00 01 ];
 126         };
 127
 128         ath9k_eep {
 129                 compatible = "ath9k,eeprom";
 130                 ath,eep-flash = <&caldata 0x1000>;
 131                 ath,mac-offset = <0x110c>;
 132                 ath,mac-increment = <2>;
 133                 ath,pci-slot = <0xe>; /* 14 */
 134         };
 135
 136         gpio-keys-polled {
 137                 compatible = "gpio-keys-polled";
 138                 #address-cells = <1>;
 139                 #size-cells = <0>;
 140                 poll-interval = <100>;
 141
 142                 reset {
 143                         label = "reset";
 144                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
 145                         linux,code = <KEY_RESTART>;
 146                 };
 147
 148                 wps {
 149                         label = "wps";
 150                         gpios = <&gpio 25 GPIO_ACTIVE_LOW>;
 151                         linux,code = <KEY_WPS_BUTTON>;
 152                 };
 153
 154                 restart {
 155                         label = "restart";
 156                         gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
 157                         linux,code = <KEY_POWER>;
 158                 };
 159         };
 160
 161         gpio-leds {
 162                 compatible = "gpio-leds";
 163
 164                 /* broadband-* is a single RGB led */
 165                 broadband-red {
 166                         label = "bthomehubv5a:red:broadband";
 167                         gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
 168                 };
 169                 broadband-green {
 170                         label = "bthomehubv5a:green:broadband";
 171                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
 172                 };
 173                 broadband_blue: broadband-blue {
 174                         label = "bthomehubv5a:blue:broadband";
 175                         gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
 176                 };
 177
 178                 /* wireless-* is a single RGB led */
 179                 wireless-red {
 180                         label = "bthomehubv5a:red:wireless";
 181                         gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
 182                 };
 183                 wireless-green {
 184                         label = "bthomehubv5a:green:wireless";
 185                         gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
 186                 };
 187                 wireless_blue: wireless-blue {
 188                         label = "bthomehubv5a:blue:wireless";
 189                         gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
 190                 };
 191
 192                 /* power-* is a single RGB led */
 193                 power_red: power-red {
 194                         label = "bthomehubv5a:red:power";
 195                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
 196                 };
 197                 power_green: power-green {
 198                         label = "bthomehubv5a:green:power";
 199                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
 200                         default-state = "keep";
 201                 };
 202                 power_blue: power-blue {
 203                         label = "bthomehubv5a:blue:power";
 204                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
 205                 };
 206
 207                 dimmed {
 208                         label = "dimmed";
 209                         gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
 210                 };
 211         };
 212 };
 213
 214 &eth0 {
 215         lan: interface@0 {
 216                 compatible = "lantiq,xrx200-pdi";
 217                 #address-cells = <1>;
 218                 #size-cells = <0>;
 219                 reg = <0>;
 220                 mtd-mac-address = <&caldata 0x110c>;
 221                 lantiq,switch;
 222
 223                 ethernet@0 {
 224                         compatible = "lantiq,xrx200-pdi-port";
 225                         reg = <0>;
 226                         phy-mode = "rgmii";
 227                         phy-handle = <&phy0>;
 228                 };
 229                 ethernet@1 {
 230                         compatible = "lantiq,xrx200-pdi-port";
 231                         reg = <1>;
 232                         phy-mode = "rgmii";
 233                         phy-handle = <&phy1>;
 234                 };
 235                 ethernet@2 {
 236                         compatible = "lantiq,xrx200-pdi-port";
 237                         reg = <2>;
 238                         phy-mode = "gmii";
 239                         phy-handle = <&phy11>;
 240                 };
 241                 ethernet@4 {
 242                         compatible = "lantiq,xrx200-pdi-port";
 243                         reg = <4>;
 244                         phy-mode = "gmii";
 245                         phy-handle = <&phy13>;
 246                 };
 247         };
 248
 249         wan: interface@1 {
 250                 compatible = "lantiq,xrx200-pdi";
 251                 #address-cells = <1>;
 252                 #size-cells = <0>;
 253                 reg = <1>;
 254                 mtd-mac-address = <&caldata 0x110c>;
 255                 mtd-mac-address-increment = <4>;
 256                 lantiq,wan;
 257
 258                 ethernet@5 {
 259                         compatible = "lantiq,xrx200-pdi-port";
 260                         reg = <5>;
 261                         phy-mode = "rgmii";
 262                         phy-handle = <&phy5>;
 263                 };
 264         };
 265
 266         mdio@0 {
 267                 #address-cells = <1>;
 268                 #size-cells = <0>;
 269                 compatible = "lantiq,xrx200-mdio";
 270
 271                 phy0: ethernet-phy@0 {
 272                         reg = <0x0>;
 273                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 274                 };
 275                 phy1: ethernet-phy@1 {
 276                         reg = <0x1>;
 277                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 278                 };
 279                 phy5: ethernet-phy@5 {
 280                         reg = <0x5>;
 281                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 282                 };
 283                 phy11: ethernet-phy@11 {
 284                         reg = <0x11>;
 285                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 286                 };
 287                 phy13: ethernet-phy@13 {
 288                         reg = <0x13>;
 289                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 290                 };
 291         };
 292 };