target/linux/lantiq/dts/P2812HNUFX.dtsi

   1 #include "vr9.dtsi"
   2
   3 #include <dt-bindings/input/input.h>
   4
   5 / {
   6         chosen {
   7                 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
   8         };
   9
  10         aliases {
  11                 led-boot = &power_green;
  12                 led-failsafe = &power_red;
  13                 led-running = &power_green;
  14
  15                 led-dsl = &dsl_green;
  16                 led-internet = &internet_green;
  17                 led-wifi = &wireless_green;
  18         };
  19
  20         memory@0 {
  21                 reg = <0x0 0x8000000>;
  22         };
  23
  24         fpi@10000000 {
  25                 gpio: pinmux@E100B10 {
  26                         pinctrl-names = "default";
  27                         pinctrl-0 = <&state_default>;
  28
  29                         state_default: pinmux {
  30                                 exin3 {
  31                                         lantiq,groups = "exin3";
  32                                         lantiq,function = "exin";
  33                                 };
  34                                 mdio {
  35                                         lantiq,groups = "mdio";
  36                                         lantiq,function = "mdio";
  37                                 };
  38                                 gphy-leds {
  39                                         lantiq,groups = "gphy0 led1", "gphy1 led1",
  40                                                         "gphy0 led2", "gphy1 led2";
  41                                         lantiq,function = "gphy";
  42                                         lantiq,pull = <2>;
  43                                         lantiq,open-drain = <0>;
  44                                         lantiq,output = <1>;
  45                                 };
  46                                 stp {
  47                                         lantiq,groups = "stp";
  48                                         lantiq,function = "stp";
  49                                         lantiq,pull = <2>;
  50                                         lantiq,open-drain = <0>;
  51                                         lantiq,output = <1>;
  52                                 };
  53                                 pci-in {
  54                                         lantiq,groups = "req1";
  55                                         lantiq,function = "pci";
  56                                         lantiq,output = <0>;
  57                                         lantiq,open-drain = <1>;
  58                                         lantiq,pull = <2>;
  59                                 };
  60                                 pci-out {
  61                                         lantiq,groups = "gnt1";
  62                                         lantiq,function = "pci";
  63                                         lantiq,output = <1>;
  64                                         lantiq,open-drain = <0>;
  65                                         lantiq,pull = <0>;
  66                                 };
  67                                 pci_rst {
  68                                         lantiq,pins = "io21";
  69                                         lantiq,output = <1>;
  70                                         lantiq,open-drain = <0>;
  71                                         lantiq,pull = <2>;
  72                                 };
  73                                 pcie-rst {
  74                                         lantiq,pins = "io38";
  75                                         lantiq,pull = <0>;
  76                                         lantiq,output = <1>;
  77                                 };
  78                                 ifxhcd-rst {
  79                                         lantiq,pins = "io33";
  80                                         lantiq,pull = <0>;
  81                                         lantiq,open-drain = <0>;
  82                                         lantiq,output = <1>;
  83                                 };
  84                                 nand_out {
  85                                         lantiq,groups = "nand cle", "nand ale";
  86                                         lantiq,function = "ebu";
  87                                         lantiq,output = <1>;
  88                                         lantiq,open-drain = <0>;
  89                                         lantiq,pull = <0>;
  90                                 };
  91                                 nand_cs1 {
  92                                         lantiq,groups = "nand cs1";
  93                                         lantiq,function = "ebu";
  94                                         lantiq,open-drain = <0>;
  95                                         lantiq,pull = <0>;
  96                                 };
  97                         };
  98                 };
  99
 100                 stp: stp@E100BB0 {
 101                         compatible = "lantiq,gpio-stp-xway";
 102                         reg = <0xE100BB0 0x40>;
 103                         #gpio-cells = <2>;
 104                         gpio-controller;
 105
 106                         lantiq,shadow = <0xffffff>;
 107                         lantiq,groups = <0x7>;
 108                         lantiq,dsl = <0x0>;
 109                         lantiq,phy1 = <0x0>;
 110                         lantiq,phy2 = <0x0>;
 111                 };
 112
 113                 ifxhcd@E101000 {
 114                         status = "okay";
 115                         gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
 116                         lantiq,portmask = <0x3>;
 117                 };
 118
 119                 ifxhcd@E106000 {
 120                         status = "okay";
 121                         gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
 122                 };
 123
 124                 pci@E105400 {
 125                         status = "okay";
 126                         gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
 127                 };
 128         };
 129
 130         gphy-xrx200 {
 131                 compatible = "lantiq,phy-xrx200";
 132                 firmware1 = "lantiq/vr9_phy11g_a1x.bin";        /*VR9 1.1*/
 133                 firmware2 = "lantiq/vr9_phy11g_a2x.bin";        /*VR9 1.2*/
 134                 phys = [ 00 01 ];
 135         };
 136
 137         gpio-keys-polled {
 138                 compatible = "gpio-keys-polled";
 139                 #address-cells = <1>;
 140                 #size-cells = <0>;
 141                 poll-interval = <100>;
 142
 143                 reset {
 144                         label = "reset";
 145                         gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
 146                         linux,code = <KEY_RESTART>;
 147                 };
 148
 149                 rfkill {
 150                         label = "rfkill";
 151                         gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
 152                         linux,code = <KEY_RFKILL>;
 153                 };
 154         };
 155
 156         gpio-leds {
 157                 compatible = "gpio-leds";
 158
 159                 internet_red {
 160                         label = "p2812hnufx:red:internet";
 161                         gpios = <&stp 16 GPIO_ACTIVE_LOW>;
 162                 };
 163                 internet_green: internet_green {
 164                         label = "p2812hnufx:green:internet";
 165                         gpios = <&stp 17 GPIO_ACTIVE_LOW>;
 166                 };
 167                 dsl_green: dsl_green {
 168                         label = "p2812hnufx:green:dsl";
 169                         gpios = <&stp 18 GPIO_ACTIVE_LOW>;
 170                 };
 171                 dsl_orange {
 172                         label = "p2812hnufx:orange:dsl";
 173                         gpios = <&stp 19 GPIO_ACTIVE_LOW>;
 174                 };
 175                 wireless_orange {
 176                         label = "p2812hnufx:orange:wlan";
 177                         gpios = <&stp 20 GPIO_ACTIVE_LOW>;
 178                 };
 179                 wireless_green: wireless_green {
 180                         label = "p2812hnufx:green:wlan";
 181                         gpios = <&stp 21 GPIO_ACTIVE_LOW>;
 182                 };
 183                 power_red: power {
 184                         label = "p2812hnufx:red:power";
 185                         gpios = <&stp 22 GPIO_ACTIVE_LOW>;
 186                 };
 187                 power_green: power2 {
 188                         label = "p2812hnufx:green:power";
 189                         gpios = <&stp 23 GPIO_ACTIVE_LOW>;
 190                         default-state = "keep";
 191                 };
 192                 phone1 {
 193                         label = "p2812hnufx:green:phone";
 194                         gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
 195                 };
 196                 phone1warn {
 197                         label = "p2812hnufx:orange:phone";
 198                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
 199                 };
 200                 phone2warn {
 201                         label = "p2812hnufx:orange:phone2";
 202                         gpios = <&gpio 26 GPIO_ACTIVE_LOW>;
 203                 };
 204                 phone2 {
 205                         label = "p2812hnufx:green:phone2";
 206                         gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
 207                 };
 208         };
 209 };
 210
 211 &eth0 {
 212         lan: interface@0 {
 213                 compatible = "lantiq,xrx200-pdi";
 214                 #address-cells = <1>;
 215                 #size-cells = <0>;
 216                 reg = <0>;
 217                 mac-address = [ 00 11 22 33 44 55 ];
 218                 lantiq,switch;
 219
 220                 ethernet@0 {
 221                         compatible = "lantiq,xrx200-pdi-port";
 222                         reg = <0>;
 223                         phy-mode = "rgmii";
 224                         phy-handle = <&phy0>;
 225                 };
 226                 ethernet@1 {
 227                         compatible = "lantiq,xrx200-pdi-port";
 228                         reg = <1>;
 229                         phy-mode = "rgmii";
 230                         phy-handle = <&phy1>;
 231                 };
 232                 ethernet@2 {
 233                         compatible = "lantiq,xrx200-pdi-port";
 234                         reg = <2>;
 235                         phy-mode = "gmii";
 236                         phy-handle = <&phy11>;
 237                 };
 238                 ethernet@4 {
 239                         compatible = "lantiq,xrx200-pdi-port";
 240                         reg = <4>;
 241                         phy-mode = "gmii";
 242                         phy-handle = <&phy13>;
 243                 };
 244                 ethernet@5 {
 245                         compatible = "lantiq,xrx200-pdi-port";
 246                         reg = <5>;
 247                         phy-mode = "rgmii";
 248                         phy-handle = <&phy5>;
 249                 };
 250         };
 251
 252         mdio@0 {
 253                 #address-cells = <1>;
 254                 #size-cells = <0>;
 255                 compatible = "lantiq,xrx200-mdio";
 256
 257                 phy0: ethernet-phy@0 {
 258                         reg = <0x0>;
 259                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 260                 };
 261                 phy1: ethernet-phy@1 {
 262                         reg = <0x1>;
 263                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 264                 };
 265                 phy5: ethernet-phy@5 {
 266                         reg = <0x5>;
 267                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 268                 };
 269                 phy11: ethernet-phy@11 {
 270                         reg = <0x11>;
 271                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 272                 };
 273                 phy13: ethernet-phy@13 {
 274                         reg = <0x13>;
 275                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 276                 };
 277         };
 278 };