target/linux/lantiq/dts/danube.dtsi

   1 #include <dt-bindings/gpio/gpio.h>
   2
   3 / {
   4         #address-cells = <1>;
   5         #size-cells = <1>;
   6         compatible = "lantiq,xway", "lantiq,danube";
   7
   8         chosen {
   9                 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
  10         };
  11
  12         cpus {
  13                 cpu@0 {
  14                         compatible = "mips,mips24Kc";
  15                 };
  16         };
  17
  18         memory@0 {
  19                 device_type = "memory";
  20         };
  21
  22         biu@1F800000 {
  23                 #address-cells = <1>;
  24                 #size-cells = <1>;
  25                 compatible = "lantiq,biu", "simple-bus";
  26                 reg = <0x1F800000 0x800000>;
  27                 ranges = <0x0 0x1F800000 0x7FFFFF>;
  28
  29                 icu0: icu@80200 {
  30                         #interrupt-cells = <1>;
  31                         interrupt-controller;
  32                         compatible = "lantiq,icu";
  33                         reg = <0x80200 0x28
  34                                 0x80228 0x28
  35                                 0x80250 0x28
  36                                 0x80278 0x28
  37                                 0x802a0 0x28>;
  38                 };
  39
  40                 watchdog@803F0 {
  41                         compatible = "lantiq,wdt";
  42                         reg = <0x803F0 0x10>;
  43                 };
  44         };
  45
  46         sram@1F000000 {
  47                 #address-cells = <1>;
  48                 #size-cells = <1>;
  49                 compatible = "lantiq,sram", "simple-bus";
  50                 reg = <0x1F000000 0x800000>;
  51                 ranges = <0x0 0x1F000000 0x7FFFFF>;
  52
  53                 eiu0: eiu@101000 {
  54                         #interrupt-cells = <1>;
  55                         interrupt-controller;
  56                         compatible = "lantiq,eiu-xway";
  57                         reg = <0x101000 0x1000>;
  58                         interrupt-parent = <&icu0>;
  59                         lantiq,eiu-irqs = <166 135 66>;
  60                 };
  61
  62                 pmu0: pmu@102000 {
  63                         compatible = "lantiq,pmu-xway";
  64                         reg = <0x102000 0x1000>;
  65                 };
  66
  67                 cgu0: cgu@103000 {
  68                         compatible = "lantiq,cgu-xway";
  69                         reg = <0x103000 0x1000>;
  70                         #clock-cells = <1>;
  71                 };
  72
  73                 vmmc@107000 {
  74                         status = "disabled";
  75                         compatible = "lantiq,vmmc-xway";
  76                         reg = <0x103000 0x400>;
  77                         interrupt-parent = <&icu0>;
  78                         interrupts = <150 151 152 153 154 155>;
  79                 };
  80
  81                 rcu0: rcu@203000 {
  82                         compatible = "lantiq,rcu-xway";
  83                         reg = <0x203000 0x1000>;
  84                 };
  85         };
  86
  87         fpi@10000000 {
  88                 #address-cells = <1>;
  89                 #size-cells = <1>;
  90                 compatible = "lantiq,fpi", "simple-bus";
  91                 ranges = <0x0 0x10000000 0xEEFFFFF>;
  92                 reg = <0x10000000 0xEF00000>;
  93
  94                 localbus@0 {
  95                         #address-cells = <2>;
  96                         #size-cells = <1>;
  97                         ranges = <0 0 0x0 0x3ffffff /* addrsel0 */
  98                                 1 0 0x4000000 0x4000010>; /* addsel1 */
  99                         compatible = "lantiq,localbus", "simple-bus";
 100                 };
 101
 102                 gptu@E100A00 {
 103                         compatible = "lantiq,gptu-xway";
 104                         reg = <0xE100A00 0x100>;
 105                         interrupt-parent = <&icu0>;
 106                         interrupts = <126 127 128 129 130 131>;
 107                 };
 108
 109                 gpios: stp@E100BB0 {
 110                         #gpio-cells = <2>;
 111                         compatible = "lantiq,gpio-stp-xway";
 112                         gpio-controller;
 113                         reg = <0xE100BB0 0x40>;
 114                         lantiq,shadow = <0xfff>;
 115                         lantiq,groups = <0x3>;
 116                         status = "disabled";
 117                 };
 118
 119                 asc0: serial@E100400 {
 120                         compatible = "lantiq,asc";
 121                         reg = <0xE100400 0x400>;
 122                         interrupt-parent = <&icu0>;
 123                         interrupts = <104 105 106>;
 124                         status = "disabled";
 125                 };
 126
 127                 gpio: pinmux@E100B10 {
 128                         compatible = "lantiq,danube-pinctrl";
 129                         #gpio-cells = <2>;
 130                         gpio-controller;
 131                         reg = <0xE100B10 0xA0>;
 132                 };
 133
 134                 asc1: serial@E100C00 {
 135                         compatible = "lantiq,asc";
 136                         reg = <0xE100C00 0x400>;
 137                         interrupt-parent = <&icu0>;
 138                         interrupts = <112 113 114>;
 139                 };
 140
 141                 ifxhcd@E101000 {
 142                         compatible = "lantiq,ifxhcd-danube";
 143                         reg = <0xE101000 0x1000
 144                                 0xE120000 0x3f000>;
 145                         interrupt-parent = <&icu0>;
 146                         interrupts = <62>;
 147                         status = "disabled";
 148                 };
 149
 150                 deu@E103100 {
 151                         compatible = "lantiq,deu-danube";
 152                         reg = <0xE103100 0xf00>;
 153                 };
 154
 155                 dma0: dma@E104100 {
 156                         compatible = "lantiq,dma-xway";
 157                         reg = <0xE104100 0x800>;
 158                 };
 159
 160                 ebu0: ebu@E105300 {
 161                         compatible = "lantiq,ebu-xway";
 162                         reg = <0xE105300 0x100>;
 163                 };
 164
 165                 mei@E116000 {
 166                         compatible = "lantiq,mei-xway";
 167                         interrupt-parent = <&icu0>;
 168                         interrupts = <63>;
 169                 };
 170
 171                 etop@E180000 {
 172                         compatible = "lantiq,etop-xway";
 173                         reg = <0xE180000 0x40000>;
 174                         interrupt-parent = <&icu0>;
 175                         interrupts = <73 78>;
 176                         mac-address = [ 00 11 22 33 44 55 ];
 177                 };
 178
 179                 ppe@E234000 {
 180                         compatible = "lantiq,ppe-danube";
 181                         interrupt-parent = <&icu0>;
 182                         interrupts = <96>;
 183                 };
 184
 185                 pci0: pci@E105400 {
 186                         status = "disabled";
 187
 188                         #address-cells = <3>;
 189                         #size-cells = <2>;
 190                         #interrupt-cells = <1>;
 191                         compatible = "lantiq,pci-xway";
 192                         bus-range = <0x0 0x0>;
 193                         ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000   /* pci memory */
 194                                   0x1000000 0 0x00000000 0xAE00000 0 0x200000>; /* io space */
 195                         reg = <0x7000000 0x8000         /* config space */
 196                                 0xE105400 0x400>;       /* pci bridge */
 197                         lantiq,bus-clock = <33333333>;
 198                         interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 199                         interrupt-map = <0x7000 0 0 1 &icu0 30 1>; /* slot 14, irq 30 */
 200                         req-mask = <0x1>; /* GNT1 */
 201                 };
 202         };
 203
 204         adsl {
 205                 compatible = "lantiq,adsl-danube";
 206         };
 207 };