5 #include <dt-bindings/input/input.h>
8 compatible = "arcadyan,arv7510pw22", "lantiq,xway", "lantiq,danube";
9 model = "Astoria Networks ARV7510PW22";
12 bootargs = "console=ttyLTQ0,115200";
17 led-failsafe = &power;
27 reg = <0x0 0x4000000>;
31 compatible = "gpio-keys-polled";
34 poll-interval = <100>;
38 gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
39 linux,code = <KEY_RFKILL>;
43 gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
44 linux,code = <KEY_POWER>;
48 gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
49 linux,code = <KEY_RESTART>;
54 compatible = "gpio-leds";
57 gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
58 default-state = "keep";
62 gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
66 gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
70 gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
74 gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
80 pinctrl-names = "default";
81 pinctrl-0 = <&state_default>;
83 state_default: pinmux {
85 lantiq,groups = "exin1";
86 lantiq,function = "exin";
91 lantiq,groups = "req1", "req2";
92 lantiq,function = "pci";
93 lantiq,open-drain = <1>;
98 lantiq,groups = "gnt1";
99 lantiq,function = "pci";
103 lantiq,pins = "io21";
108 lantiq,pins = "io2", "io4", "io8", "io9", "io10", "io15", "io20";
112 lantiq,pins = "io11", "io12", "io28";
113 lantiq,open-drain = <1>;
119 usb_vbus: regulator-usb-vbus {
120 compatible = "regulator-fixed";
122 regulator-name = "USB_VBUS";
124 regulator-min-microvolt = <5000000>;
125 regulator-max-microvolt = <5000000>;
127 gpio = <&gpio 8 GPIO_ACTIVE_HIGH>;
133 /* Switch reset 19 */
135 mtd-mac-address = <&boardconfig 0x16>;
140 compatible = "lantiq,nor";
142 reg = <0 0x0 0x1000000>;
143 #address-cells = <1>;
147 compatible = "fixed-partitions";
148 #address-cells = <1>;
153 reg = <0x00000 0x40000>;
159 reg = <0x40000 0x20000>;
165 reg = <0x60000 0xf80000>;
168 boardconfig: partition@fe0000 {
169 label = "board_config";
170 reg = <0xfe0000 0x20000>;
179 lantiq,external-clock;
181 0x7000 0 0 1 &icu0 30
182 0x7800 0 0 1 &icu0 135
183 0x7800 0 0 2 &icu0 135
184 0x7800 0 0 3 &icu0 135
186 gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
190 compatible = "pci1814,3592";
191 reg = <0x7000 0 0 0 0>;
192 ralink,mtd-eeprom = <&boardconfig 0x410>;
193 ralink,mtd-eeprom-swap;
203 vbus-supply = <&usb_vbus>;
208 gpios = <&gpio 9 GPIO_ACTIVE_HIGH>;