target/linux/lantiq/files-4.14/arch/mips/boot/dts/vr9.dtsi

   1 #include <dt-bindings/gpio/gpio.h>
   2
   3 / {
   4         #address-cells = <1>;
   5         #size-cells = <1>;
   6         compatible = "lantiq,xway", "lantiq,vr9";
   7
   8         aliases {
   9                 serial0 = &asc1;
  10         };
  11
  12         chosen {
  13                 stdout-path = "serial0:115200n8";
  14         };
  15
  16         cpus {
  17                 cpu@0 {
  18                         compatible = "mips,mips34Kc";
  19                 };
  20         };
  21
  22         memory@0 {
  23                 device_type = "memory";
  24         };
  25
  26         cputemp@0 {
  27                 compatible = "lantiq,cputemp";
  28         };
  29
  30         biu@1f800000 {
  31                 #address-cells = <1>;
  32                 #size-cells = <1>;
  33                 compatible = "lantiq,biu", "simple-bus";
  34                 reg = <0x1f800000 0x800000>;
  35                 ranges = <0x0 0x1f800000 0x7fffff>;
  36
  37                 icu0: icu@80200 {
  38                         #interrupt-cells = <1>;
  39                         interrupt-controller;
  40                         compatible = "lantiq,icu";
  41                         reg = <0x80200 0x28
  42                                 0x80228 0x28
  43                                 0x80250 0x28
  44                                 0x80278 0x28
  45                                 0x802a0 0x28>;
  46                 };
  47
  48                 watchdog@803f0 {
  49                         compatible = "lantiq,xrx100-wdt", "lantiq,xrx100-wdt";
  50                         reg = <0x803f0 0x10>;
  51
  52                         regmap = <&rcu0>;
  53                 };
  54         };
  55
  56         sram@1f000000 {
  57                 #address-cells = <1>;
  58                 #size-cells = <1>;
  59                 compatible = "lantiq,sram", "simple-bus";
  60                 reg = <0x1f000000 0x800000>;
  61                 ranges = <0x0 0x1f000000 0x7fffff>;
  62
  63                 eiu0: eiu@101000 {
  64                         #interrupt-cells = <1>;
  65                         interrupt-controller;
  66                         compatible = "lantiq,eiu-xway";
  67                         reg = <0x101000 0x1000>;
  68                         interrupt-parent = <&icu0>;
  69                         lantiq,eiu-irqs = <166 135 66 40 41 42>;
  70                 };
  71
  72                 pmu0: pmu@102000 {
  73                         compatible = "lantiq,pmu-xway";
  74                         reg = <0x102000 0x1000>;
  75                 };
  76
  77                 cgu0: cgu@103000 {
  78                         compatible = "lantiq,cgu-xway";
  79                         reg = <0x103000 0x1000>;
  80                 };
  81
  82                 dcdc@106a00 {
  83                         compatible = "lantiq,dcdc-xrx200";
  84                         reg = <0x106a00 0x200>;
  85                 };
  86
  87                 vmmc: vmmc@103000 {
  88                         status = "disabled";
  89                         compatible = "lantiq,vmmc-xway";
  90                         reg = <0x103000 0x400>;
  91                         interrupt-parent = <&icu0>;
  92                         interrupts = <150 151 152 153 154 155>;
  93                 };
  94
  95                 rcu0: rcu@203000 {
  96                         compatible = "lantiq,xrx200-rcu", "simple-mfd", "syscon";
  97                         reg = <0x203000 0x100>;
  98                         ranges = <0x0 0x203000 0x100>;
  99                         big-endian;
 100
 101                         gphy0: gphy@20 {
 102                                 compatible = "lantiq,xrx200-gphy";
 103                                 reg = <0x20 0x4>;
 104
 105                                 resets = <&reset0 31 30>, <&reset1 7 7>;
 106                                 reset-names = "gphy", "gphy2";
 107                         };
 108
 109                         gphy1: gphy@68 {
 110                                 compatible = "lantiq,xrx200-gphy";
 111                                 reg = <0x68 0x4>;
 112
 113                                 resets = <&reset0 29 28>, <&reset1 6 6>;
 114                                 reset-names = "gphy", "gphy2";
 115                         };
 116
 117                         reset0: reset-controller@10 {
 118                                 compatible = "lantiq,xrx200-reset";
 119                                 reg = <0x10 4>, <0x14 4>;
 120
 121                                 #reset-cells = <2>;
 122                         };
 123
 124                         reset1: reset-controller@48 {
 125                                 compatible = "lantiq,xrx200-reset";
 126                                 reg = <0x48 4>, <0x24 4>;
 127
 128                                 #reset-cells = <2>;
 129                         };
 130
 131                         usb_phy0: usb2-phy@18 {
 132                                 compatible = "lantiq,xrx200-usb2-phy";
 133                                 reg = <0x18 4>, <0x38 4>;
 134                                 status = "disabled";
 135
 136                                 resets = <&reset1 4 4>, <&reset0 4 4>;
 137                                 reset-names = "phy", "ctrl";
 138                                 #phy-cells = <0>;
 139                         };
 140
 141                         usb_phy1: usb2-phy@34 {
 142                                 compatible = "lantiq,xrx200-usb2-phy";
 143                                 reg = <0x34 4>, <0x3c 4>;
 144                                 status = "disabled";
 145
 146                                 resets = <&reset1 5 4>, <&reset0 4 4>;
 147                                 reset-names = "phy", "ctrl";
 148                                 #phy-cells = <0>;
 149                         };
 150
 151                         reboot@10 {
 152                                 compatible = "syscon-reboot";
 153                                 reg = <0x10 4>;
 154
 155                                 regmap = <&rcu0>;
 156                                 offset = <0x10>;
 157                                 mask = <0xe0000000>;
 158                         };
 159                 };
 160         };
 161
 162         fpi@10000000 {
 163                 compatible = "lantiq,xrx200-fpi", "simple-bus";
 164                 ranges = <0x0 0x10000000 0xf000000>;
 165                 reg =   <0x1f400000 0x1000>,
 166                         <0x10000000 0xf000000>;
 167                 regmap = <&rcu0>;
 168                 offset-endianness = <0x4c>;
 169                 #address-cells = <1>;
 170                 #size-cells = <1>;
 171
 172                 localbus: localbus@0 {
 173                         #address-cells = <2>;
 174                         #size-cells = <1>;
 175                         ranges = <0 0 0x0 0x3ffffff /* addrsel0 */
 176                                 1 0 0x4000000 0x4000010>; /* addsel1 */
 177                         compatible = "lantiq,localbus", "simple-bus";
 178                 };
 179
 180                 gptu@e100a00 {
 181                         compatible = "lantiq,gptu-xway";
 182                         reg = <0xe100a00 0x100>;
 183                         interrupt-parent = <&icu0>;
 184                         interrupts = <126 127 128 129 130 131>;
 185                 };
 186
 187                 usif: usif@da00000 {
 188                         compatible = "lantiq,usif";
 189                         reg = <0xda00000 0x1000000>;
 190                         interrupt-parent = <&icu0>;
 191                         interrupts = <29 125 107 108 109 110>;
 192                         status = "disabled";
 193                 };
 194
 195                 spi: spi@e100800 {
 196                         compatible = "lantiq,xrx200-spi", "lantiq,xrx100-spi";
 197                         reg = <0xe100800 0x100>;
 198                         interrupt-parent = <&icu0>;
 199                         interrupts = <22 23 24>;
 200                         interrupt-names = "spi_rx", "spi_tx", "spi_err",
 201                                         "spi_frm";
 202                         #address-cells = <1>;
 203                         #size-cells = <1>;
 204                         status = "disabled";
 205                 };
 206
 207                 gpio: pinmux@e100b10 {
 208                         compatible = "lantiq,xrx200-pinctrl";
 209                         #gpio-cells = <2>;
 210                         gpio-controller;
 211                         reg = <0xe100b10 0xa0>;
 212                 };
 213
 214                 stp: stp@e100bb0 {
 215                         status = "disabled";
 216                         compatible = "lantiq,gpio-stp-xway";
 217                         reg = <0xe100bb0 0x40>;
 218                         #gpio-cells = <2>;
 219                         gpio-controller;
 220
 221                         lantiq,shadow = <0xffffff>;
 222                         lantiq,groups = <0x7>;
 223                         lantiq,dsl = <0x0>;
 224                         lantiq,phy1 = <0x0>;
 225                         lantiq,phy2 = <0x0>;
 226                 };
 227
 228                 asc1: serial@e100c00 {
 229                         compatible = "lantiq,asc";
 230                         reg = <0xe100c00 0x400>;
 231                         interrupt-parent = <&icu0>;
 232                         interrupts = <112 113 114>;
 233                 };
 234
 235                 deu@e103100 {
 236                         compatible = "lantiq,deu-xrx200";
 237                         reg = <0xe103100 0xf00>;
 238                 };
 239
 240                 dma0: dma@e104100 {
 241                         compatible = "lantiq,dma-xway";
 242                         reg = <0xe104100 0x800>;
 243                 };
 244
 245                 ebu0: ebu@e105300 {
 246                         compatible = "lantiq,ebu-xway";
 247                         reg = <0xe105300 0x100>;
 248                 };
 249
 250                 usb0: usb@e101000 {
 251                         status = "disabled";
 252                         compatible = "lantiq,xrx200-usb";
 253                         reg = <0xe101000 0x1000
 254                                 0xe120000 0x3f000>;
 255                         interrupt-parent = <&icu0>;
 256                         interrupts = <62 91>;
 257                         dr_mode = "host";
 258                         phys = <&usb_phy0>;
 259                         phy-names = "usb2-phy";
 260                 };
 261
 262                 usb1: usb@e106000 {
 263                         status = "disabled";
 264                         compatible = "lantiq,xrx200-usb";
 265                         reg = <0xe106000 0x1000>;
 266                         interrupt-parent = <&icu0>;
 267                         interrupts = <91>;
 268                         dr_mode = "host";
 269                         phys = <&usb_phy1>;
 270                         phy-names = "usb2-phy";
 271                 };
 272
 273                 eth0: eth@e108000 {
 274                         #address-cells = <1>;
 275                         #size-cells = <0>;
 276                         compatible = "lantiq,xrx200-net";
 277                         reg = < 0xe108000 0x3000 /* switch */
 278                                 0xe10b100 0x70 /* mdio */
 279                                 0xe10b1d8 0x30 /* mii */
 280                                 0xe10b308 0x30 /* pmac */
 281                         >;
 282                         interrupt-parent = <&icu0>;
 283                         interrupts = <75 73 72>;
 284                         resets = <&reset0 21 16>, <&reset0 8 8>;
 285                         reset-names = "switch", "ppe";
 286                         lantiq,phys = <&gphy0>, <&gphy1>;
 287                 };
 288
 289                 mei@e116000 {
 290                         compatible = "lantiq,mei-xrx200";
 291                         reg = <0xe116000 0x9c>;
 292                         interrupt-parent = <&icu0>;
 293                         interrupts = <63>;
 294                 };
 295
 296                 ppe@e234000 {
 297                         compatible = "lantiq,ppe-xrx200";
 298                         interrupt-parent = <&icu0>;
 299                         interrupts = <96>;
 300                 };
 301
 302                 pcie0: pcie@d900000 {
 303                         compatible = "lantiq,pcie-xrx200";
 304
 305                         #interrupt-cells = <1>;
 306                         #size-cells = <2>;
 307                         #address-cells = <3>;
 308
 309                         interrupt-parent = <&icu0>;
 310                         interrupts = <161 144>;
 311
 312                         device_type = "pci";
 313
 314                         gpio-reset = <&gpio 38 GPIO_ACTIVE_HIGH>;
 315                 };
 316
 317                 pci0: pci@e105400 {
 318                         status = "disabled";
 319
 320                         #address-cells = <3>;
 321                         #size-cells = <2>;
 322                         #interrupt-cells = <1>;
 323                         compatible = "lantiq,pci-xway";
 324                         bus-range = <0x0 0x0>;
 325                         ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000   /* pci memory */
 326                                 0x1000000 0 0x00000000 0xae00000 0 0x200000>; /* io space */
 327                         reg = <0x7000000 0x8000         /* config space */
 328                                 0xe105400 0x400>;       /* pci bridge */
 329                         lantiq,bus-clock = <33333333>;
 330                         interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 331                         interrupt-map = <0x7000 0 0 1 &icu0 30 1>; /* slot 14, irq 30 */
 332                         req-mask = <0x1>; /* GNT1 */
 333                 };
 334         };
 335
 336         vdsl {
 337                 compatible = "lantiq,vdsl-vrx200";
 338         };
 339 };