target/linux/ramips/dts/AIR3GII.dts

   1 /dts-v1/;
   2
   3 #include "rt5350.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "airlive,air3gii", "ralink,rt5350-soc";
  10         model = "AirLive Air3GII";
  11
  12         gpio-leds {
  13                 compatible = "gpio-leds";
  14
  15                 wlan {
  16                         label = "air3gii:green:wlan";
  17                         gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
  18                 };
  19
  20                 mobile {
  21                         label = "air3gii:green:mobile";
  22                         gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
  23                 };
  24         };
  25
  26         gpio-keys-polled {
  27                 compatible = "gpio-keys-polled";
  28                 #address-cells = <1>;
  29                 #size-cells = <0>;
  30                 poll-interval = <20>;
  31
  32                 wps {
  33                         label = "wps";
  34                         gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
  35                         linux,code = <KEY_WPS_BUTTON>;
  36                 };
  37         };
  38 };
  39
  40 &gpio0 {
  41         status = "okay";
  42 };
  43
  44 &spi0 {
  45         status = "okay";
  46
  47         m25p80@0 {
  48                 #address-cells = <1>;
  49                 #size-cells = <1>;
  50                 compatible = "jedec,spi-nor";
  51                 reg = <0>;
  52                 spi-max-frequency = <10000000>;
  53
  54                 partition@0 {
  55                         label = "u-boot";
  56                         reg = <0x0 0x30000>;
  57                         read-only;
  58                 };
  59
  60                 partition@30000 {
  61                         label = "u-boot-env";
  62                         reg = <0x30000 0x10000>;
  63                         read-only;
  64                 };
  65
  66                 factory: partition@40000 {
  67                         label = "factory";
  68                         reg = <0x40000 0x10000>;
  69                         read-only;
  70                 };
  71
  72                 partition@50000 {
  73                         label = "firmware";
  74                         reg = <0x50000 0x3b0000>;
  75                 };
  76         };
  77 };
  78
  79 &pinctrl {
  80         state_default: pinctrl0 {
  81                 gpio {
  82                         ralink,group = "i2c", "jtag", "uartf";
  83                         ralink,function = "gpio";
  84                 };
  85         };
  86 };
  87
  88 &ethernet {
  89         mtd-mac-address = <&factory 0x4>;
  90 };
  91
  92 &esw {
  93         mediatek,portmap = <0x2f>;
  94 };
  95
  96 &wmac {
  97         ralink,mtd-eeprom = <&factory 0>;
  98 };