ramips: fix size-cells on spi nodes
[openwrt/staging/wigyori.git] / target / linux / ramips / dts / ALL5002.dts
1 /dts-v1/;
2
3 #include "rt3352.dtsi"
4
5 / {
6 compatible = "ALL5002", "ralink,rt3352-soc";
7 model = "Allnet ALL5002";
8
9 i2c-gpio {
10 compatible = "i2c-gpio";
11 gpios = <&gpio0 1 0 &gpio0 2 0>;
12 i2c-gpio,delay-us = <10>;
13
14 pcf0: iexp@38 {
15 #gpio-cells = <2>;
16 compatible = "inxp,pcf8574a";
17 reg = <0x38>;
18 gpio-controller;
19 };
20
21 hwmon@4b {
22 compatible = "national,lm92";
23 reg = <0x4b>;
24 };
25 };
26
27 gpio-leds {
28 compatible = "gpio-leds";
29
30 ld1 {
31 label = "all5002:green:ld1";
32 gpios = <&pcf0 0 1>;
33 };
34
35 ld2 {
36 label = "all5002:green:ld2";
37 gpios = <&pcf0 1 1>;
38 };
39 };
40 };
41
42 &gpio0 {
43 status = "okay";
44 };
45
46 &spi0 {
47 status = "okay";
48
49 m25p80@0 {
50 #address-cells = <1>;
51 #size-cells = <1>;
52 compatible = "jedec,spi-nor";
53 reg = <0>;
54 linux,modalias = "m25p80", "mx25l25635e";
55 spi-max-frequency = <10000000>;
56
57 partition@0 {
58 label = "u-boot";
59 reg = <0x0 0x30000>;
60 read-only;
61 };
62
63 partition@30000 {
64 label = "u-boot-env";
65 reg = <0x30000 0x10000>;
66 read-only;
67 };
68
69 factory: partition@40000 {
70 label = "factory";
71 reg = <0x40000 0x10000>;
72 read-only;
73 };
74
75 partition@50000 {
76 label = "firmware";
77 reg = <0x50000 0x1fb0000>;
78 };
79 };
80 };
81
82 &pinctrl {
83 state_default: pinctrl0 {
84 gpio {
85 ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
86 ralink,function = "gpio";
87 };
88 };
89 };
90
91 &ethernet {
92 mtd-mac-address = <&factory 0x28>;
93 };
94
95 &esw {
96 mediatek,portmap = <0x3f>;
97 };
98
99 &wmac {
100 ralink,mtd-eeprom = <&factory 0>;
101 };
102
103 &ehci {
104 status = "okay";
105 };
106
107 &ohci {
108 status = "okay";
109 };