fix typo pinmmux -> pinmux
[openwrt/staging/wigyori.git] / target / linux / ramips / dts / ALL5002.dts
1 /dts-v1/;
2
3 /include/ "rt3352.dtsi"
4
5 / {
6 #address-cells = <1>;
7 #size-cells = <1>;
8 compatible = "ALL5002", "ralink,rt3352-soc";
9 model = "Allnet ALL5002/ALL5003";
10
11 memorydetect {
12 ralink,memory = <0x0 0x200000 0x10000000>;
13 };
14
15 chosen {
16 bootargs = "console=ttyS0,57600 mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,32448k@0x50000(firmware)";
17 };
18
19 palmbus@10000000 {
20 sysc@0 {
21 ralink,pinmux = "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
22 ralink,gpiomux = "i2c";
23 ralink,uartmux = "gpio";
24 ralink,wdtmux = <1>;
25 };
26
27 gpio0: gpio@600 {
28 status = "okay";
29 };
30
31 spi@b00 {
32 status = "okay";
33 m25p80@0 {
34 #address-cells = <1>;
35 #size-cells = <1>;
36 compatible = "mx25l25635e";
37 reg = <0 0>;
38 linux,modalias = "m25p80", "mx25l25635e";
39 spi-max-frequency = <10000000>;
40 };
41 };
42 };
43
44 ethernet@10100000 {
45 status = "okay";
46 };
47
48 esw@10110000 {
49 status = "okay";
50 ralink,portmap = <0x3f>;
51 };
52
53 wmac@10180000 {
54 status = "okay";
55 };
56
57 ehci@101c0000 {
58 status = "okay";
59 };
60
61 ohci@101c1000 {
62 status = "okay";
63 };
64
65 i2c-gpio {
66 compatible = "i2c-gpio";
67
68 gpios = <&gpio0 1 0 &gpio0 2 0>;
69 i2c-gpio,delay-us = <10>;
70
71 pcf0: iexp@38 {
72 #gpio-cells = <2>;
73 compatible = "inxp,pcf8574a";
74 reg = <0x38>;
75 gpio-controller;
76 };
77
78 hwmon@4b {
79 compatible = "national,lm92";
80 reg = <0x4b>;
81 };
82 };
83
84 gpio-leds {
85 compatible = "gpio-leds";
86 ld1 {
87 label = "allnet:green:ld1";
88 gpios = <&pcf0 0 1>;
89 };
90 ld2 {
91 label = "allnet:green:ld2";
92 gpios = <&pcf0 1 1>;
93 };
94 };
95 };