ramips: remove top-level {address,size}-cells properties from .dts files
[openwrt/staging/wigyori.git] / target / linux / ramips / dts / ALL5002.dts
1 /dts-v1/;
2
3 /include/ "rt3352.dtsi"
4
5 / {
6 compatible = "ALL5002", "ralink,rt3352-soc";
7 model = "Allnet ALL5002/ALL5003";
8
9 memorydetect {
10 ralink,memory = <0x0 0x200000 0x10000000>;
11 };
12
13 chosen {
14 bootargs = "console=ttyS0,57600 mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,32448k@0x50000(firmware)";
15 };
16
17 palmbus@10000000 {
18 sysc@0 {
19 ralink,pinmux = "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
20 ralink,gpiomux = "i2c";
21 ralink,uartmux = "gpio";
22 ralink,wdtmux = <1>;
23 };
24
25 gpio0: gpio@600 {
26 status = "okay";
27 };
28
29 spi@b00 {
30 status = "okay";
31 m25p80@0 {
32 #address-cells = <1>;
33 #size-cells = <1>;
34 compatible = "mx25l25635e";
35 reg = <0 0>;
36 linux,modalias = "m25p80", "mx25l25635e";
37 spi-max-frequency = <10000000>;
38 };
39 };
40 };
41
42 ethernet@10100000 {
43 status = "okay";
44 };
45
46 esw@10110000 {
47 status = "okay";
48 ralink,portmap = <0x3f>;
49 };
50
51 wmac@10180000 {
52 status = "okay";
53 };
54
55 ehci@101c0000 {
56 status = "okay";
57 };
58
59 ohci@101c1000 {
60 status = "okay";
61 };
62
63 i2c-gpio {
64 compatible = "i2c-gpio";
65
66 gpios = <&gpio0 1 0 &gpio0 2 0>;
67 i2c-gpio,delay-us = <10>;
68
69 pcf0: iexp@38 {
70 #gpio-cells = <2>;
71 compatible = "inxp,pcf8574a";
72 reg = <0x38>;
73 gpio-controller;
74 };
75
76 hwmon@4b {
77 compatible = "national,lm92";
78 reg = <0x4b>;
79 };
80 };
81
82 gpio-leds {
83 compatible = "gpio-leds";
84 ld1 {
85 label = "allnet:green:ld1";
86 gpios = <&pcf0 0 1>;
87 };
88 ld2 {
89 label = "allnet:green:ld2";
90 gpios = <&pcf0 1 1>;
91 };
92 };
93 };