2b2c49492c6230762b186860019a96c4c7dd100a
[openwrt/staging/wigyori.git] / target / linux / ramips / dts / ASL26555-16M.dts
1 /dts-v1/;
2
3 #include "rt3050.dtsi"
4
5 / {
6 compatible = "ASL26555", "ralink,rt3050-soc";
7 model = "Alpha ASL26555";
8
9 gpio-keys-polled {
10 compatible = "gpio-keys-polled";
11 #address-cells = <1>;
12 #size-cells = <0>;
13 poll-interval = <20>;
14
15 reset {
16 label = "reset";
17 gpios = <&gpio0 10 0>;
18 linux,code = <0x198>;
19 };
20
21 wps {
22 label = "wps";
23 gpios = <&gpio0 12 0>;
24 linux,code = <0x211>;
25 };
26 };
27
28 gpio-leds {
29 compatible = "gpio-leds";
30
31 eth {
32 label = "asl26555:green:eth";
33 gpios = <&gpio0 0 1>;
34 };
35
36 wan-red {
37 label = "asl26555:red:wan";
38 gpios = <&gpio0 1 0>;
39 };
40
41 wan-green {
42 label = "asl26555:green:wan";
43 gpios = <&gpio0 2 0>;
44 };
45
46 wlan {
47 label = "asl26555:green:wlan";
48 gpios = <&gpio0 7 0>;
49 };
50
51 power-green {
52 label = "asl26555:green:power";
53 gpios = <&gpio0 8 0>;
54 };
55
56 power-red {
57 label = "asl26555:red:power";
58 gpios = <&gpio0 9 0>;
59 };
60
61 3g-green {
62 label = "asl26555:green:3g";
63 gpios = <&gpio0 14 1>;
64 };
65
66 3g-red {
67 label = "asl26555:red:3g";
68 gpios = <&gpio0 17 1>;
69 };
70 };
71 };
72
73 &gpio0 {
74 status = "okay";
75 };
76
77 &spi0 {
78 status = "okay";
79
80 m25p80@0 {
81 #address-cells = <1>;
82 #size-cells = <1>;
83 compatible = "jedec,spi-nor";
84 reg = <0 0>;
85 linux,modalias = "m25p80", "s25sl12801";
86 spi-max-frequency = <10000000>;
87
88 partition@0 {
89 label = "uboot";
90 reg = <0x0 0x30000>;
91 read-only;
92 };
93
94 partition@30000 {
95 label = "uboot-env";
96 reg = <0x30000 0x10000>;
97 read-only;
98 };
99
100 partition@40000 {
101 label = "factory";
102 reg = <0x40000 0x10000>;
103 read-only;
104 };
105
106 partition@50000 {
107 label = "firmware";
108 reg = <0x50000 0xf80000>;
109 };
110
111 partition@fd0000 {
112 label = "cert";
113 reg = <0xfd0000 0x10000>;
114 read-only;
115 };
116
117 partition@fe0000 {
118 label = "langpack";
119 reg = <0xfe0000 0x10000>;
120 read-only;
121 };
122
123 devdata: partition@ff0000 {
124 label = "devdata";
125 reg = <0xff0000 0x10000>;
126 read-only;
127 };
128 };
129 };
130
131 &pinctrl {
132 state_default: pinctrl0 {
133 gpio {
134 ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
135 ralink,function = "gpio";
136 };
137 };
138 };
139
140 &ethernet {
141 mtd-mac-address = <&devdata 0x4004>;
142 };
143
144 &esw {
145 mediatek,portmap = <0x1e>;
146 };
147
148 &wmac {
149 ralink,mtd-eeprom = <&devdata 0x4000>;
150 };
151
152 &otg {
153 status = "okay";
154 };