target/linux/ramips/dts/AWAPN2403.dts

   1 /dts-v1/;
   2
   3 #include "rt3050.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "asiarf,awapn2403", "ralink,rt3052-soc";
  10         model = "AsiaRF AWAPN2403";
  11
  12         aliases {
  13                 led-status = &led_wps;
  14         };
  15
  16
  17         gpio-leds {
  18                 compatible = "gpio-leds";
  19
  20                 led_wps: wps {
  21                         label = "awapn2403:green:wps";
  22                         gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
  23                 };
  24         };
  25
  26         gpio-keys-polled {
  27                 compatible = "gpio-keys-polled";
  28                 poll-interval = <20>;
  29
  30                 reset {
  31                         label = "reset";
  32                         gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
  33                         linux,code = <KEY_RESTART>;
  34                 };
  35         };
  36 };
  37
  38 &spi0 {
  39         status = "okay";
  40
  41         m25p80@0 {
  42                 compatible = "jedec,spi-nor";
  43                 reg = <0>;
  44                 spi-max-frequency = <10000000>;
  45
  46                 partitions {
  47                         compatible = "fixed-partitions";
  48                         #address-cells = <1>;
  49                         #size-cells = <1>;
  50
  51                         partition@0 {
  52                                 label = "u-boot";
  53                                 reg = <0x0 0x30000>;
  54                                 read-only;
  55                         };
  56
  57                         partition@30000 {
  58                                 label = "u-boot-env";
  59                                 reg = <0x30000 0x10000>;
  60                                 read-only;
  61                         };
  62
  63                         factory: partition@40000 {
  64                                 label = "factory";
  65                                 reg = <0x40000 0x10000>;
  66                                 read-only;
  67                         };
  68
  69                         partition@50000 {
  70                                 label = "firmware";
  71                                 reg = <0x50000 0x3b0000>;
  72                         };
  73                 };
  74         };
  75 };
  76
  77 &pinctrl {
  78         state_default: pinctrl0 {
  79                 gpio {
  80                         ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
  81                         ralink,function = "gpio";
  82                 };
  83         };
  84 };
  85
  86 &esw {
  87         mediatek,portmap = <0x3e>;
  88 };
  89
  90 &wmac {
  91         ralink,mtd-eeprom = <&factory 0>;
  92 };