8035d7c01f0de5e3c7f5d7545d2d1b3b53816f71
[openwrt/staging/wigyori.git] / target / linux / ramips / dts / BC2.dts
1 /dts-v1/;
2
3 #include "rt3050.dtsi"
4
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
7
8 / {
9 compatible = "nexaira,bc2", "ralink,rt3052-soc";
10 model = "NexAira BC2";
11
12 cfi@1f000000 {
13 compatible = "cfi-flash";
14 reg = <0x1f000000 0x800000>;
15 bank-width = <2>;
16 device-width = <2>;
17
18 partitions {
19 compatible = "fixed-partitions";
20 #address-cells = <1>;
21 #size-cells = <1>;
22
23 partition@0 {
24 label = "u-boot";
25 reg = <0x0 0x30000>;
26 read-only;
27 };
28
29 partition@30000 {
30 label = "u-boot-env";
31 reg = <0x30000 0x10000>;
32 read-only;
33 };
34
35 factory: partition@40000 {
36 label = "factory";
37 reg = <0x40000 0x10000>;
38 read-only;
39 };
40
41 partition@50000 {
42 compatible = "denx,uimage";
43 label = "firmware";
44 reg = <0x50000 0x7b0000>;
45 };
46 };
47 };
48
49 gpio-leds {
50 compatible = "gpio-leds";
51
52 usb {
53 label = "bc2:blue:usb";
54 gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
55 trigger-sources = <&otg_port1>;
56 linux,default-trigger = "usbport";
57 };
58 };
59
60 keys {
61 compatible = "gpio-keys-polled";
62 poll-interval = <20>;
63
64 reset {
65 label = "reset";
66 gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
67 linux,code = <KEY_RESTART>;
68 };
69 };
70 };
71
72 &pinctrl {
73 state_default: pinctrl0 {
74 gpio {
75 ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
76 ralink,function = "gpio";
77 };
78 };
79 };
80
81 &ethernet {
82 mtd-mac-address = <&factory 0x4>;
83 };
84
85 &esw {
86 mediatek,portmap = <0x2f>;
87 };
88
89 &wmac {
90 ralink,mtd-eeprom = <&factory 0>;
91 };
92
93 &otg {
94 status = "okay";
95 };