ramips: add support for indicating the boot state using multiple leds
[openwrt/staging/wigyori.git] / target / linux / ramips / dts / BR-6475ND.dts
1 /dts-v1/;
2
3 #include "rt3883.dtsi"
4
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
7
8 / {
9 compatible = "edimax,br-6475nd", "ralink,rt3883-soc";
10 model = "Edimax BR-6475nD";
11
12 aliases {
13 led-boot = &led_power;
14 led-failsafe = &led_power;
15 led-running = &led_power;
16 led-upgrade = &led_power;
17 };
18
19 gpio-keys-polled {
20 compatible = "gpio-keys-polled";
21 poll-interval = <100>;
22
23 reset {
24 label = "reset";
25 gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
26 linux,code = <KEY_RESTART>;
27 };
28
29 rfkill {
30 label = "rfkill";
31 gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
32 linux,input-type = <EV_SW>;
33 linux,code = <KEY_RFKILL>;
34 };
35 };
36
37 gpio-leds {
38 compatible = "gpio-leds";
39
40 led_power: power {
41 label = "br-6475nd:green:power";
42 gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
43 };
44
45 wlan {
46 label = "br-6475nd:amber:wlan";
47 gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
48 };
49
50 wlan_5ghz {
51 label = "br-6475nd:amber:wlan_5ghz";
52 gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
53 };
54 };
55
56 nor-flash@1c000000 {
57 compatible = "cfi-flash";
58 reg = <0x1c000000 0x800000>;
59 bank-width = <2>;
60
61 partitions {
62 compatible = "fixed-partitions";
63 #address-cells = <1>;
64 #size-cells = <1>;
65
66 partition@0 {
67 reg = <0x00000000 0x00030000>;
68 label = "u-boot";
69 read-only;
70 };
71
72 partition@30000 {
73 reg = <0x00030000 0x00010000>;
74 label = "nvram";
75 read-only;
76 };
77
78 factory: partition@40000 {
79 reg = <0x00040000 0x00010000>;
80 label = "factory";
81 read-only;
82 };
83
84 devdata: partition@50000 {
85 reg = <0x00050000 0x00020000>;
86 label = "devdata";
87 read-only;
88 };
89
90 partition@70000 {
91 reg = <0x00070000 0x00790000>;
92 label = "firmware";
93 };
94 };
95 };
96
97 rtl8367 {
98 compatible = "realtek,rtl8367";
99 gpio-sda = <&gpio0 5 GPIO_ACTIVE_HIGH>;
100 gpio-sck = <&gpio0 4 GPIO_ACTIVE_HIGH>;
101 realtek,extif0 = <1 0 1 1 1 1 1 1 2>;
102 };
103
104 /*
105 * Unclear if this is the correct gpio setup; the USB ports are
106 * unpopulated on a stock BR-6475nD, even though the hardware exists
107 * and the headers are there.
108 */
109 /*
110 gpio_export {
111 compatible = "gpio-export";
112 #size-cells = <0>;
113
114 usb {
115 gpio-export,name="usb";
116 gpio-export,output=<0>;
117 gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
118 };
119 };
120 */
121 };
122
123 &pinctrl {
124 state_default: pinctrl0 {
125 gpio {
126 ralink,group = "spi", "jtag", "uartf";
127 ralink,function = "gpio";
128 };
129 };
130 };
131
132 &timer {
133 status = "okay";
134 };
135
136 &gpio1 {
137 status = "okay";
138 };
139
140 &uartlite {
141 status = "okay";
142 };
143
144 &ethernet {
145 status = "okay";
146 mtd-mac-address = <&devdata 0x0d>;
147
148 port@0 {
149 mediatek,fixed-link = <1000 1 1 1>;
150 };
151 };
152
153 &wmac {
154 status = "okay";
155 ralink,mtd-eeprom = <&factory 0>;
156 };
157
158 &pci {
159 status = "okay";
160 };
161
162 &pci1 {
163 status = "okay";
164
165 wifi@0,0 {
166 compatible = "pci0,0";
167 reg = <0x10000 0 0 0 0>;
168 ralink,5ghz = <0>;
169 ralink,mtd-eeprom = <&factory 0x8000>;
170 };
171 };
172
173 &ehci {
174 status = "okay";
175 };
176
177 &ohci {
178 status = "okay";
179 };