ramips: Add profile for the Edimax BR-6475nD
[openwrt/staging/wigyori.git] / target / linux / ramips / dts / BR-6475ND.dts
1 /dts-v1/;
2
3 /include/ "rt3883.dtsi"
4
5 / {
6 compatible = "BR-6475ND", "ralink,rt3883-soc";
7 model = "Edimax BR-6475nD";
8
9 pinctrl {
10 state_default: pinctrl0 {
11 gpio {
12 ralink,group = "spi", "jtag", "uartf";
13 ralink,function = "gpio";
14 };
15 };
16 };
17
18 palmbus@10000000 {
19 timer@100 {
20 status = "okay";
21 };
22
23 gpio1: gpio@638 {
24 status = "okay";
25 };
26
27 uartlite@c00 {
28 status = "okay";
29 };
30 };
31
32 ethernet@10100000 {
33 status = "okay";
34
35 port@0 {
36 ralink,fixed-link = <1000 1 1 1>;
37 };
38 };
39
40 pci@10140000 {
41 status = "okay";
42
43 pinctrl-names = "default";
44 pinctrl-0 = <&pci_pins>;
45 pci_pins: pci {
46 pci {
47 ralink,group = "pci";
48 ralink,function = "pci-fnc";
49 };
50 };
51
52 host-bridge {
53 pci-bridge@1 {
54 status = "okay";
55 wmac@0,0 {
56 compatible = "ralink,rt2880-pci", "pciclass060400", "pciclass0604";
57 reg = < 0x10000 0 0 0 0 >;
58 ralink,eeprom = "soc_wmac.eeprom";
59 };
60 };
61 };
62 };
63
64 ehci@101c0000 {
65 status = "okay";
66 };
67
68 ohci@101c1000 {
69 status = "okay";
70 };
71
72 nor-flash@1c000000 {
73 compatible = "cfi-flash";
74 reg = <0x1c000000 0x800000>;
75
76 bank-width = <2>;
77 #address-cells = <1>;
78 #size-cells = <1>;
79
80 partition@0 {
81 reg = <0x00000000 0x00030000>;
82 label = "u-boot";
83 read-only;
84 };
85
86 partition@30000 {
87 reg = <0x00030000 0x00010000>;
88 label = "nvram";
89 read-only;
90 };
91
92 factory: partition@40000 {
93 reg = <0x00040000 0x00010000>;
94 label = "factory";
95 read-only;
96 };
97
98 partition@50000 {
99 reg = <0x00050000 0x00020000>;
100 label = "devdata";
101 read-only;
102 };
103
104 partition@70000 {
105 reg = <0x00070000 0x00790000>;
106 label = "firmware";
107 };
108
109 partition@170000 {
110 reg = <0x00270000 0x00590000>;
111 label = "rootfs";
112 };
113 };
114
115 rtl8367 {
116 compatible = "realtek,rtl8367";
117 gpio-sda = <&gpio0 5 0>;
118 gpio-sck = <&gpio0 4 0>;
119 realtek,extif0 = <1 0 1 1 1 1 1 1 2>;
120 };
121
122 gpio-keys-polled {
123 compatible = "gpio-keys-polled";
124 #address-cells = <1>;
125 #size-cells = <0>;
126 poll-interval = <100>;
127 reset {
128 label = "reset";
129 gpios = <&gpio0 7 1>;
130 linux,code = <0x198>;
131 };
132 rfkill {
133 label = "rfkill";
134 gpios = <&gpio0 9 1>;
135 linux,input-type = <5>;
136 linux,code = <0xf7>;
137 };
138 };
139
140 gpio-leds {
141 compatible = "gpio-leds";
142
143 power {
144 label = "edimax:green:power";
145 gpios = <&gpio0 10 1>;
146 };
147 wlan {
148 label = "edimax:amber:wlan";
149 gpios = <&gpio0 11 1>;
150 };
151 wlan_5ghz {
152 label = "edimax:amber:wlan_5ghz";
153 gpios = <&gpio0 14 1>;
154 };
155 };
156
157 /* Unclear if this is the correct gpio setup; the USB ports are
158 unpopulated on a stock BR-6475nD, even though the hardware exists
159 and the headers are there. */
160 /*
161 gpio_export {
162 compatible = "gpio-export";
163 #size-cells = <0>;
164 usb {
165 gpio-export,name="usb";
166 gpio-export,output=<0>;
167 gpios = <&gpio0 19 0>;
168 };
169 };
170 */
171 };