target/linux/ramips/dts/BROADWAY.dts

   1 /dts-v1/;
   2
   3 #include "rt3050.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "hauppauge,broadway", "ralink,rt3052-soc";
  10         model = "Hauppauge Broadway";
  11
  12         cfi@1f000000 {
  13                 compatible = "cfi-flash";
  14                 reg = <0x1f000000 0x800000>;
  15                 bank-width = <2>;
  16                 device-width = <2>;
  17
  18                 partitions {
  19                         compatible = "fixed-partitions";
  20                         #address-cells = <1>;
  21                         #size-cells = <1>;
  22
  23                         partition@0 {
  24                                 label = "bootloader";
  25                                 reg = <0x0 0x30000>;
  26                                 read-only;
  27                         };
  28
  29                         partition@30000 {
  30                                 label = "config";
  31                                 reg = <0x30000 0x10000>;
  32                                 read-only;
  33                         };
  34
  35                         factory: partition@40000 {
  36                                 label = "factory";
  37                                 reg = <0x40000 0x10000>;
  38                                 read-only;
  39                         };
  40
  41                         partition@50000 {
  42                                 label = "firmware";
  43                                 reg = <0x50000 0x790000>;
  44                         };
  45                 };
  46         };
  47
  48         gpio-leds {
  49                 compatible = "gpio-leds";
  50
  51                 diskmounted {
  52                         label = "broadway:red:diskmounted";
  53                         gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
  54                         trigger-sources = <&otg_port1>;
  55                         linux,default-trigger = "usbport";
  56                 };
  57
  58                 wps_active {
  59                         label = "broadway:red:wps_active";
  60                         gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
  61                 };
  62         };
  63
  64         gpio-keys-polled {
  65                 compatible = "gpio-keys-polled";
  66                 poll-interval = <20>;
  67
  68                 factory {
  69                         label = "Factory Reset button";
  70                         gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
  71                         linux,code = <KEY_RESTART>;
  72                 };
  73         };
  74 };
  75
  76 &pinctrl {
  77         state_default: pinctrl0 {
  78                 gpio {
  79                         ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
  80                         ralink,function = "gpio";
  81                 };
  82         };
  83 };
  84
  85 &ethernet {
  86         mtd-mac-address = <&factory 0x4>;
  87 };
  88
  89 &esw {
  90         mediatek,portmap = <0x3e>;
  91 };
  92
  93 &wmac {
  94         ralink,mtd-eeprom = <&factory 0>;
  95 };
  96
  97 &otg {
  98         status = "okay";
  99 };