d076e6432d0ed66a289c31e836abb95b9fb237f3
[openwrt/staging/wigyori.git] / target / linux / ramips / dts / CF-WR800N.dts
1 /dts-v1/;
2
3 #include "mt7620n.dtsi"
4
5 / {
6 compatible = "cf-wr800n", "ralink,mt7620n-soc";
7 model = "Comfast CF-WR800N";
8
9 chosen {
10 bootargs = "console=ttyS0,115200";
11 };
12
13 gpio-leds {
14 compatible = "gpio-leds";
15
16 ethernet {
17 label = "cf-wr800n:white:ethernet";
18 gpios = <&gpio2 4 1>;
19 };
20
21 wifi {
22 label = "cf-wr800n:white:wifi";
23 gpios = <&gpio3 0 1>;
24 };
25
26 wps {
27 label = "cf-wr800n:white:wps";
28 gpios = <&gpio1 15 1>;
29 };
30 };
31
32 gpio-keys-polled {
33 compatible = "gpio-keys-polled";
34 #address-cells = <1>;
35 #size-cells = <0>;
36 poll-interval = <20>;
37
38 reset {
39 label = "reset";
40 gpios = <&gpio0 2 1>;
41 linux,code = <0x198>;
42 };
43 };
44 };
45
46 &gpio0 {
47 status = "okay";
48 };
49
50 &gpio1 {
51 status = "okay";
52 };
53
54 &gpio2 {
55 status = "okay";
56 };
57
58 &gpio3 {
59 status = "okay";
60 };
61
62 &spi0 {
63 status = "okay";
64
65 m25p80@0 {
66 #address-cells = <1>;
67 #size-cells = <1>;
68 compatible = "jedec,spi-nor";
69 reg = <0 0>;
70 linux,modalias = "m25p80", "w25q64";
71 spi-max-frequency = <10000000>;
72
73 partition@0 {
74 label = "u-boot";
75 reg = <0x0 0x30000>;
76 read-only;
77 };
78
79 partition@30000 {
80 label = "u-boot-env";
81 reg = <0x30000 0x10000>;
82 read-only;
83 };
84
85 factory: partition@40000 {
86 label = "factory";
87 reg = <0x40000 0x10000>;
88 read-only;
89 };
90
91 partition@50000 {
92 label = "firmware";
93 reg = <0x50000 0x7b0000>;
94 };
95 };
96 };
97
98 &ethernet {
99 mtd-mac-address = <&factory 0x4>;
100 };
101
102 &wmac {
103 ralink,mtd-eeprom = <&factory 0>;
104 };
105
106 &pinctrl {
107 state_default: pinctrl0 {
108 default {
109 ralink,group = "ephy", "wled", "spi refclk", "i2c";
110 ralink,function = "gpio";
111 };
112 };
113 };