ramips: dts: Unify naming of gpio-led nodes
[openwrt/staging/wigyori.git] / target / linux / ramips / dts / CY-SWR1100.dts
1 /dts-v1/;
2
3 #include "rt3883.dtsi"
4
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
7
8 / {
9 compatible = "samsung,cy-swr1100", "ralink,rt3883-soc";
10 model = "Samsung CY-SWR1100";
11
12 aliases {
13 led-boot = &led_wps;
14 led-failsafe = &led_wps;
15 };
16
17 nor-flash@1c000000 {
18 compatible = "cfi-flash";
19 reg = <0x1c000000 0x800000>;
20 bank-width = <2>;
21
22 partitions {
23 compatible = "fixed-partitions";
24 #address-cells = <1>;
25 #size-cells = <1>;
26
27 partition@0 {
28 label = "uboot";
29 reg = <0x0 0x30000>;
30 read-only;
31 };
32
33 partition@30000 {
34 label = "uboot-env";
35 reg = <0x30000 0x4000>;
36 read-only;
37 };
38
39 factory: partition@34000 {
40 label = "factory";
41 reg = <0x34000 0x4000>;
42 read-only;
43 };
44
45 partition@38000 {
46 label = "nvram";
47 reg = <0x38000 0x8000>;
48 read-only;
49 };
50
51 partition@40000 {
52 label = "devdata";
53 reg = <0x40000 0x10000>;
54 };
55
56 partition@50000 {
57 compatible = "seama";
58 label = "firmware";
59 reg = <0x50000 0x7b0000>;
60 };
61 };
62 };
63
64 rtl8367 {
65 compatible = "realtek,rtl8367";
66 gpio-sda = <&gpio0 1 GPIO_ACTIVE_HIGH>;
67 gpio-sck = <&gpio0 2 GPIO_ACTIVE_HIGH>;
68 realtek,extif0 = <1 0 1 1 1 1 1 1 2>;
69 };
70
71 keys {
72 compatible = "gpio-keys-polled";
73 poll-interval = <100>;
74
75 reset {
76 label = "reset";
77 gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
78 linux,code = <KEY_RESTART>;
79 };
80
81 wps {
82 label = "wps";
83 gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
84 linux,code = <KEY_WPS_BUTTON>;
85 };
86 };
87
88 leds {
89 compatible = "gpio-leds";
90
91 led_wps: wps {
92 label = "cy-swr1100:blue:wps";
93 gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
94 };
95
96 usb {
97 label = "cy-swr1100:blue:usb";
98 gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
99 trigger-sources = <&ohci_port1>, <&ehci_port1>;
100 linux,default-trigger = "usbport";
101 };
102 };
103 };
104
105 &gpio1 {
106 status = "okay";
107 };
108
109 &pinctrl {
110 state_default: pinctrl0 {
111 gpio {
112 ralink,group = "i2c", "spi";
113 ralink,function = "gpio";
114 };
115 };
116 };
117
118 &ethernet {
119 port@0 {
120 mediatek,fixed-link = <1000 1 1 1>;
121 phy-mode = "rgmii";
122 };
123 };
124
125 &pci {
126 status = "okay";
127 };
128
129 &pci1 {
130 status = "okay";
131
132 wifi@0,0 {
133 compatible = "pci0,0";
134 reg = <0x10000 0 0 0 0>;
135 ralink,5ghz = <0>;
136 ralink,mtd-eeprom = <&factory 0x2000>;
137 };
138 };
139
140 &wmac {
141 status = "okay";
142 ralink,2ghz = <0>;
143 ralink,mtd-eeprom = <&factory 0>;
144 };
145
146 &ehci {
147 status = "okay";
148 };
149
150 &ohci {
151 status = "okay";
152 };