target/linux/ramips/dts/D105.dts

   1 /dts-v1/;
   2
   3 /include/ "rt3050.dtsi"
   4
   5 / {
   6         compatible = "D105", "ralink,rt3050-soc";
   7         model = "Huawei D105";
   8
   9         memorydetect {
  10                 ralink,memory = <0x0 0x200000 0x4000000>;
  11         };
  12
  13         chosen {
  14                 bootargs = "console=ttyS0,57600 mtdparts=1f000000.cfi:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,3776k@0x50000(firmware)";
  15         };
  16
  17         palmbus@10000000 {
  18                 sysc@0 {
  19                         ralink,pinmux = "i2c", "spi", "uartlite", "mdio", "sdram", "rgmii";
  20                         ralink,gpiomux = "jtag";
  21                         ralink,uartmux = "gpio";
  22                         ralink,wdtmux = <1>;
  23                 };
  24
  25                 gpio0: gpio@600 {
  26                         status = "okay";
  27                 };
  28
  29         };
  30
  31         cfi@1f000000 {
  32                 compatible = "cfi-flash";
  33                 reg = <0x1f000000 0x800000>;
  34
  35                 bank-width = <2>;
  36                 device-width = <2>;
  37                 #address-cells = <1>;
  38                 #size-cells = <1>;
  39         };
  40
  41         gpio-leds {
  42                 compatible = "gpio-leds";
  43                 power {
  44                         label = "d105:red:power";
  45                         gpios = <&gpio0 0 1>;
  46                 };
  47                 wps {
  48                         label = "d105:green:usb";
  49                         gpios = <&gpio0 13 1>;
  50                 };
  51         };
  52
  53         gpio-keys-polled {
  54                 compatible = "gpio-keys-polled";
  55                 #address-cells = <1>;
  56                 #size-cells = <0>;
  57                 poll-interval = <20>;
  58                 reset {
  59                         label = "reset";
  60                         gpios = <&gpio0 10 1>;
  61                         linux,code = <0x198>;
  62                 };
  63         };
  64
  65         ethernet@10100000 {
  66                 status = "okay";
  67         };
  68
  69         esw@10110000 {
  70                 status = "okay";
  71                 ralink,portmap = <0x2f>;
  72         };
  73
  74         wmac@10180000 {
  75                 status = "okay";
  76         };
  77
  78         otg@101c0000 {
  79                 status = "okay";
  80         };
  81 };