treewide: dts: use keycode defines from input dt-binding
[openwrt/staging/wigyori.git] / target / linux / ramips / dts / DAP-1350.dts
1 /dts-v1/;
2
3 #include "rt3050.dtsi"
4
5 #include <dt-bindings/input/input.h>
6
7 / {
8 compatible = "DAP-1350", "ralink,rt3052-soc";
9 model = "D-Link DAP-1350";
10
11 chosen {
12 bootargs = "console=ttyS0,115200";
13 };
14
15 cfi@1f000000 {
16 compatible = "cfi-flash";
17 reg = <0x1f000000 0x800000>;
18 bank-width = <2>;
19 device-width = <2>;
20 #address-cells = <1>;
21 #size-cells = <1>;
22
23 partition@0 {
24 label = "u-boot";
25 reg = <0x0 0x30000>;
26 read-only;
27 };
28
29 devdata: partition@30000 {
30 label = "devdata";
31 reg = <0x30000 0x10000>;
32 read-only;
33 };
34
35 partition@40000 {
36 label = "devconf";
37 reg = <0x40000 0x30000>;
38 read-only;
39 };
40
41 partition@70000 {
42 label = "devlang";
43 reg = <0x70000 0x40000>;
44 read-only;
45 };
46
47 partition@b0000 {
48 label = "firmware";
49 reg = <0xb0000 0x750000>;
50 };
51 };
52
53 gpio-leds {
54 compatible = "gpio-leds";
55
56 power {
57 label = "dap-1350:blue:power";
58 gpios = <&gpio0 8 1>;
59 };
60
61 power2 {
62 label = "dap-1350:red:power";
63 gpios = <&gpio0 9 1>;
64 };
65
66 wps {
67 label = "dap-1350:blue:wps";
68 gpios = <&gpio0 14 1>;
69 };
70 };
71
72 gpio-keys-polled {
73 compatible = "gpio-keys-polled";
74 #address-cells = <1>;
75 #size-cells = <0>;
76 poll-interval = <20>;
77
78 reset {
79 label = "reset";
80 gpios = <&gpio0 10 1>;
81 linux,code = <KEY_RESTART>;
82 };
83
84 wps {
85 label = "wps";
86 gpios = <&gpio0 0 1>;
87 linux,code = <KEY_WPS_BUTTON>;
88 };
89
90 rt {
91 label = "rt";
92 gpios = <&gpio0 11 1>;
93 linux,code = <BTN_0>;
94 };
95
96 ap {
97 label = "ap";
98 gpios = <&gpio0 7 1>;
99 linux,code = <BTN_1>;
100 };
101 };
102 };
103
104 &pinctrl {
105 state_default: pinctrl0 {
106 gpio {
107 ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
108 ralink,function = "gpio";
109 };
110 };
111 };
112
113 &ethernet {
114 mtd-mac-address = <&devdata 0x2e>;
115 };
116
117 &esw {
118 mediatek,portmap = <0x2f>;
119 };
120
121 &wmac {
122 ralink,mtd-eeprom = <&devdata 0>;
123 };
124
125 &otg {
126 status = "okay";
127 };