ramips: fix indentation and other mistakes in .dts{, i} files
[openwrt/staging/wigyori.git] / target / linux / ramips / dts / DAP-1350.dts
1 /dts-v1/;
2
3 /include/ "rt3050.dtsi"
4
5 / {
6 compatible = "DAP-1350", "ralink,rt3052-soc";
7 model = "D-Link DAP-1350";
8
9 chosen {
10 bootargs = "console=ttyS0,115200";
11 };
12
13 pinctrl {
14 state_default: pinctrl0 {
15 gpio {
16 ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
17 ralink,function = "gpio";
18 };
19 };
20 };
21
22 cfi@1f000000 {
23 compatible = "cfi-flash";
24 reg = <0x1f000000 0x800000>;
25 bank-width = <2>;
26 device-width = <2>;
27 #address-cells = <1>;
28 #size-cells = <1>;
29
30 partition@0 {
31 label = "u-boot";
32 reg = <0x0 0x30000>;
33 read-only;
34 };
35
36 devdata: partition@30000 {
37 label = "devdata";
38 reg = <0x30000 0x10000>;
39 read-only;
40 };
41
42 partition@40000 {
43 label = "devconf";
44 reg = <0x40000 0x30000>;
45 read-only;
46 };
47
48 partition@70000 {
49 label = "devlang";
50 reg = <0x70000 0x40000>;
51 read-only;
52 };
53
54 partition@b0000 {
55 label = "firmware";
56 reg = <0xb0000 0x750000>;
57 };
58 };
59
60 ethernet@10100000 {
61 mtd-mac-address = <&devdata 0x2e>;
62 };
63
64 esw@10110000 {
65 ralink,portmap = <0x2f>;
66 };
67
68 wmac@10180000 {
69 ralink,mtd-eeprom = <&devdata 0>;
70 };
71
72 gpio-leds {
73 compatible = "gpio-leds";
74
75 power {
76 label = "d-link:blue:power";
77 gpios = <&gpio0 8 1>;
78 };
79
80 power2 {
81 label = "d-link:red:power";
82 gpios = <&gpio0 9 1>;
83 };
84
85 wps {
86 label = "d-link:blue:wps";
87 gpios = <&gpio0 14 1>;
88 };
89 };
90
91 gpio-keys-polled {
92 compatible = "gpio-keys-polled";
93 #address-cells = <1>;
94 #size-cells = <0>;
95 poll-interval = <20>;
96
97 reset {
98 label = "reset";
99 gpios = <&gpio0 10 1>;
100 linux,code = <0x198>;
101 };
102
103 wps {
104 label = "wps";
105 gpios = <&gpio0 0 1>;
106 linux,code = <0x211>;
107 };
108
109 rt {
110 label = "rt";
111 gpios = <&gpio0 11 1>;
112 linux,code = <0x100>;
113 };
114
115 ap {
116 label = "ap";
117 gpios = <&gpio0 7 1>;
118 linux,code = <0x101>;
119 };
120 };
121
122 otg@101c0000 {
123 status = "okay";
124 };
125 };