ramips: dts: Unify naming of gpio-keys nodes
[openwrt/staging/wigyori.git] / target / linux / ramips / dts / DAP-1350.dts
1 /dts-v1/;
2
3 #include "rt3050.dtsi"
4
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
7
8 / {
9 compatible = "dlink,dap-1350", "ralink,rt3052-soc";
10 model = "D-Link DAP-1350";
11
12 aliases {
13 led-boot = &led_power_blue;
14 led-failsafe = &led_power_blue;
15 led-running = &led_power_blue;
16 led-upgrade = &led_power_blue;
17 };
18
19 chosen {
20 bootargs = "console=ttyS0,115200";
21 };
22
23 cfi@1f000000 {
24 compatible = "cfi-flash";
25 reg = <0x1f000000 0x800000>;
26 bank-width = <2>;
27 device-width = <2>;
28
29 partitions {
30 compatible = "fixed-partitions";
31 #address-cells = <1>;
32 #size-cells = <1>;
33
34 partition@0 {
35 label = "u-boot";
36 reg = <0x0 0x30000>;
37 read-only;
38 };
39
40 devdata: partition@30000 {
41 label = "devdata";
42 reg = <0x30000 0x10000>;
43 read-only;
44 };
45
46 partition@40000 {
47 label = "devconf";
48 reg = <0x40000 0x30000>;
49 read-only;
50 };
51
52 partition@70000 {
53 label = "devlang";
54 reg = <0x70000 0x40000>;
55 read-only;
56 };
57
58 partition@b0000 {
59 compatible = "denx,uimage";
60 label = "firmware";
61 reg = <0xb0000 0x750000>;
62 };
63 };
64 };
65
66 gpio-leds {
67 compatible = "gpio-leds";
68
69 led_power_blue: power {
70 label = "dap-1350:blue:power";
71 gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
72 };
73
74 power2 {
75 label = "dap-1350:red:power";
76 gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
77 };
78
79 wps {
80 label = "dap-1350:blue:wps";
81 gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
82 };
83 };
84
85 keys {
86 compatible = "gpio-keys-polled";
87 poll-interval = <20>;
88
89 reset {
90 label = "reset";
91 gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
92 linux,code = <KEY_RESTART>;
93 };
94
95 wps {
96 label = "wps";
97 gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
98 linux,code = <KEY_WPS_BUTTON>;
99 };
100
101 rt {
102 label = "rt";
103 gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
104 linux,code = <BTN_0>;
105 };
106
107 ap {
108 label = "ap";
109 gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
110 linux,code = <BTN_1>;
111 };
112 };
113 };
114
115 &pinctrl {
116 state_default: pinctrl0 {
117 gpio {
118 ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
119 ralink,function = "gpio";
120 };
121 };
122 };
123
124 &ethernet {
125 mtd-mac-address = <&devdata 0x2e>;
126 };
127
128 &esw {
129 mediatek,portmap = <0x2f>;
130 };
131
132 &wmac {
133 ralink,mtd-eeprom = <&devdata 0>;
134 };
135
136 &otg {
137 status = "okay";
138 };