target/linux/ramips/dts/DCS-930.dts

   1 /dts-v1/;
   2
   3 #include "rt3050.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "dlink,dcs-930", "ralink,rt3050-soc";
  10         model = "D-Link DCS-930";
  11
  12         aliases {
  13                 led-status = &led_status;
  14         };
  15
  16         cfi@1f000000 {
  17                 compatible = "cfi-flash";
  18                 reg = <0x1f000000 0x400000>;
  19                 bank-width = <2>;
  20                 device-width = <2>;
  21
  22                 partitions {
  23                         compatible = "fixed-partitions";
  24                         #address-cells = <1>;
  25                         #size-cells = <1>;
  26
  27                         partition@0 {
  28                                 label = "u-boot";
  29                                 reg = <0x0 0x30000>;
  30                                 read-only;
  31                         };
  32
  33                         partition@30000 {
  34                                 label = "u-boot-env";
  35                                 reg = <0x30000 0x10000>;
  36                                 read-only;
  37                         };
  38
  39                         factory: partition@40000 {
  40                                 label = "factory";
  41                                 reg = <0x40000 0x10000>;
  42                                 read-only;
  43                         };
  44
  45                         partition@50000 {
  46                                 label = "firmware";
  47                                 reg = <0x50000 0x3b0000>;
  48                         };
  49                 };
  50         };
  51
  52         gpio-leds {
  53                 compatible = "gpio-leds";
  54
  55                 wifi {
  56                         label = "dcs-930:red:alert";
  57                         gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
  58                 };
  59
  60                 led_status: status {
  61                         label = "dcs-930:green:status";
  62                         gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
  63                 };
  64
  65                 wps {
  66                         label = "dcs-930:blue:wps";
  67                         gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
  68                 };
  69         };
  70
  71         gpio-keys-polled {
  72                 compatible = "gpio-keys-polled";
  73                 poll-interval = <20>;
  74
  75                 wps {
  76                         label = "wps";
  77                         gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
  78                         linux,code = <BTN_1>;
  79                 };
  80
  81                 reset {
  82                         label = "reset";
  83                         gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
  84                         linux,code = <KEY_RESTART>;
  85                 };
  86         };
  87 };
  88
  89 &pinctrl {
  90         state_default: pinctrl0 {
  91                 gpio {
  92                         ralink,group = "i2c", "spi", "jtag", "mdio", "rgmii", "uartf";
  93                         ralink,function = "gpio";
  94                 };
  95         };
  96 };
  97
  98 &ethernet {
  99         mtd-mac-address = <&factory 0x4>;
 100 };
 101
 102 &esw {
 103         mediatek,portmap = <0x2f>;
 104 };
 105
 106 &wmac {
 107         ralink,mtd-eeprom = <&factory 0>;
 108 };
 109
 110 &otg {
 111         status = "okay";
 112 };