target/linux/ramips/dts/DIR-610-A1.dts

   1 /dts-v1/;
   2
   3 #include "rt5350.dtsi"
   4
   5 / {
   6         compatible = "DIR-610-A1", "ralink,rt5350-soc";
   7         model = "D-Link DIR-610 A1";
   8
   9         gpio-leds {
  10                 compatible = "gpio-leds";
  11
  12                 status {
  13                         label = "dir-610-a1:green:status";
  14                         gpios = <&gpio0 9 1>;
  15                 };
  16
  17                 wps {
  18                         label = "dir-610-a1:green:wps";
  19                         gpios = <&gpio0 13 1>;
  20                 };
  21         };
  22
  23         gpio-keys-polled {
  24                 compatible = "gpio-keys-polled";
  25                 #address-cells = <1>;
  26                 #size-cells = <0>;
  27                 poll-interval = <20>;
  28
  29                 reset {
  30                         label = "reset";
  31                         gpios = <&gpio0 10 1>;
  32                         linux,code = <0x198>;
  33                 };
  34
  35                 wps {
  36                         label = "wps";
  37                         gpios = <&gpio0 0 1>;
  38                         linux,code = <0x211>;
  39                 };
  40         };
  41 };
  42
  43 &spi0 {
  44         status = "okay";
  45
  46         m25p80@0 {
  47                 #address-cells = <1>;
  48                 #size-cells = <1>;
  49                 compatible = "jedec,spi-nor";
  50                 reg = <0>;
  51                 linux,modalias = "m25p80";
  52                 spi-max-frequency = <10000000>;
  53
  54                 partition@0 {
  55                         label = "u-boot";
  56                         reg = <0x0 0x30000>;
  57                         read-only;
  58                 };
  59
  60                 devdata: partition@30000 {
  61                         label = "devdata";
  62                         reg = <0x30000 0x10000>;
  63                         read-only;
  64                 };
  65
  66                 factory: partition@40000 {
  67                         label = "factory";
  68                         reg = <0x40000 0x10000>;
  69                         read-only;
  70                 };
  71
  72                 partition@50000 {
  73                         label = "firmware";
  74                         reg = <0x50000 0x3b0000>;
  75                 };
  76         };
  77 };
  78
  79 &pinctrl {
  80         state_default: pinctrl0 {
  81                 gpio {
  82                         ralink,group = "i2c", "jtag", "uartf";
  83                         ralink,function = "gpio";
  84                 };
  85         };
  86 };
  87
  88 &ethernet {
  89         mtd-mac-address = <&devdata 0x4004>;
  90 };
  91
  92 &esw {
  93         status = "okay";
  94         mediatek,portmap = <0x2f>;
  95         mediatek,led_polarity = <0x17>;
  96 };
  97
  98 &wmac {
  99         status = "okay";
 100         ralink,led-polarity = <1>;
 101         ralink,mtd-eeprom = <&devdata 0x4000>;
 102 };