target/linux/ramips/dts/DIR-615-D.dts

   1 /dts-v1/;
   2
   3 /include/ "rt3050.dtsi"
   4
   5 / {
   6         compatible = "DIR-615-D", "ralink,rt3050-soc";
   7         model = "D-Link DIR-615 D";
   8
   9         memorydetect {
  10                 ralink,memory = <0x0 0x200000 0x4000000>;
  11         };
  12
  13         chosen {
  14                 bootargs = "console=ttyS0,57600 mtdparts=1f000000.cfi:192k(u-boot)ro,64k(devdata)ro,64k(devconf)ro,3776k@0x50000(firmware)";
  15         };
  16
  17         palmbus@10000000 {
  18                 sysc@0 {
  19                         ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
  20                         ralink,uartmux = "gpio";
  21                         ralink,wdtmux = <1>;
  22                 };
  23
  24                 gpio0: gpio@600 {
  25                         status = "okay";
  26                 };
  27
  28         };
  29
  30         cfi@1f000000 {
  31                 compatible = "cfi-flash";
  32                 reg = <0x1f000000 0x800000>;
  33
  34                 bank-width = <2>;
  35                 device-width = <2>;
  36                 #address-cells = <1>;
  37                 #size-cells = <1>;
  38
  39                 partition@0 {
  40                         label = "u-boot";
  41                         reg = <0x0 0x30000>;
  42                         read-only;
  43                 };
  44
  45                 partition@30000 {
  46                         label = "devdata";
  47                         reg = <0x30000 0x10000>;
  48                         read-only;
  49                 };
  50
  51                 partition@40000 {
  52                         label = "devconf";
  53                         reg = <0x40000 0x10000>;
  54                         read-only;
  55                 };
  56
  57                 partition@50000 {
  58                         label = "firmware";
  59                         reg = <0x50000 0x3b0000>;
  60                 };
  61         };
  62
  63         ethernet@10100000 {
  64                 status = "okay";
  65         };
  66
  67         esw@10110000 {
  68                 status = "okay";
  69                 ralink,portmap = <0x2f>;
  70         };
  71
  72         gpio-keys-polled {
  73                 compatible = "gpio-keys-polled";
  74                 #address-cells = <1>;
  75                 #size-cells = <0>;
  76                 poll-interval = <20>;
  77                 reset {
  78                         label = "reset";
  79                         gpios = <&gpio0 10 1>;
  80                         linux,code = <0x198>;
  81                 };
  82                 wps {
  83                         label = "wps";
  84                         gpios = <&gpio0 0 1>;
  85                         linux,code = <0x211>;
  86                 };
  87         };
  88
  89         wmac@10180000 {
  90                 status = "okay";
  91         };
  92
  93         gpio-leds {
  94                 compatible = "gpio-leds";
  95                 status {
  96                         label = "d-link:amber:status";
  97                         gpios = <&gpio0 8 1>;
  98                 };
  99                 status2 {
 100                         label = "d-link:green:status";
 101                         gpios = <&gpio0 9 1>;
 102                 };
 103                 wan {
 104                         label = "d-link:amber:wan";
 105                         gpios = <&gpio0 14 1>;
 106                 };
 107                 wan2 {
 108                         label = "d-link:green:wan";
 109                         gpios = <&gpio0 12 1>;
 110                 };
 111                 wps {
 112                         label = "d-link:blue:wps";
 113                         gpios = <&gpio0 13 1>;
 114                 };
 115         };
 116 };