ramips: express diag led handling via devicetree
[openwrt/staging/wigyori.git] / target / linux / ramips / dts / DIR-615-D.dts
1 /dts-v1/;
2
3 #include "rt3050.dtsi"
4
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
7
8 / {
9 compatible = "dlink,dir-615-d1", "ralink,rt3050-soc";
10 model = "D-Link DIR-615 D";
11
12 aliases {
13 led-status = &led_status_green;
14 };
15
16 cfi@1f000000 {
17 compatible = "cfi-flash";
18 reg = <0x1f000000 0x800000>;
19 bank-width = <2>;
20 device-width = <2>;
21
22 partitions {
23 compatible = "fixed-partitions";
24 #address-cells = <1>;
25 #size-cells = <1>;
26
27 partition@0 {
28 label = "u-boot";
29 reg = <0x0 0x30000>;
30 read-only;
31 };
32
33 devdata: partition@30000 {
34 label = "devdata";
35 reg = <0x30000 0x10000>;
36 read-only;
37 };
38
39 partition@40000 {
40 label = "devconf";
41 reg = <0x40000 0x10000>;
42 read-only;
43 };
44
45 partition@50000 {
46 label = "firmware";
47 reg = <0x50000 0x3b0000>;
48 };
49 };
50 };
51
52 gpio-keys-polled {
53 compatible = "gpio-keys-polled";
54 poll-interval = <20>;
55
56 reset {
57 label = "reset";
58 gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
59 linux,code = <KEY_RESTART>;
60 };
61
62 wps {
63 label = "wps";
64 gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
65 linux,code = <KEY_WPS_BUTTON>;
66 };
67 };
68
69 gpio-leds {
70 compatible = "gpio-leds";
71
72 status {
73 label = "dir-615-d:amber:status";
74 gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
75 default-state = "off";
76 };
77
78 led_status_green: status2 {
79 label = "dir-615-d:green:status";
80 gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
81 default-state = "on";
82 };
83
84 wan {
85 label = "dir-615-d:amber:wan";
86 gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
87 };
88
89 wan2 {
90 label = "dir-615-d:green:wan";
91 gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
92 };
93
94 wps {
95 label = "dir-615-d:blue:wps";
96 gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
97 };
98 };
99 };
100
101 &esw {
102 mediatek,portmap = <0x2f>;
103 };
104
105 &wmac {
106 ralink,mtd-eeprom = <&devdata 0x4000>;
107 };
108
109 &pinctrl {
110 state_default: pinctrl0 {
111 gpio {
112 ralink,group = "i2c", "spi", "jtag", "mdio", "rgmii", "uartf";
113 ralink,function = "gpio";
114 };
115 };
116 };
117
118