ramips: dts: Unify naming of gpio-led nodes
[openwrt/staging/wigyori.git] / target / linux / ramips / dts / DIR-620-A1.dts
1 /dts-v1/;
2
3 #include "rt3050.dtsi"
4
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
7
8 / {
9 compatible = "dlink,dir-620-a1", "ralink,rt3050-soc";
10 model = "D-Link DIR-620 A1";
11
12 aliases {
13 led-boot = &led_status_green;
14 led-failsafe = &led_status_green;
15 led-running = &led_status_green;
16 led-upgrade = &led_status_green;
17 };
18
19 cfi@1f000000 {
20 compatible = "cfi-flash";
21 reg = <0x1f000000 0x800000>;
22 bank-width = <2>;
23 device-width = <2>;
24
25 partitions {
26 compatible = "fixed-partitions";
27 #address-cells = <1>;
28 #size-cells = <1>;
29
30 partition@0 {
31 label = "u-boot";
32 reg = <0x0 0x30000>;
33 read-only;
34 };
35
36 partition@30000 {
37 label = "u-boot-env";
38 reg = <0x30000 0x10000>;
39 read-only;
40 };
41
42 factory: partition@40000 {
43 label = "factory";
44 reg = <0x40000 0x10000>;
45 read-only;
46 };
47
48 partition@50000 {
49 compatible = "denx,uimage";
50 label = "firmware";
51 reg = <0x50000 0x7b0000>;
52 };
53 };
54 };
55
56 keys {
57 compatible = "gpio-keys-polled";
58 poll-interval = <20>;
59
60 reset {
61 label = "reset";
62 gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
63 linux,code = <KEY_RESTART>;
64 };
65
66 wps {
67 label = "wps";
68 gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
69 linux,code = <KEY_WPS_BUTTON>;
70 };
71 };
72
73 leds {
74 compatible = "gpio-leds";
75
76 status {
77 label = "dir-620-a1:amber:status";
78 gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
79 };
80
81 led_status_green: status2 {
82 label = "dir-620-a1:green:status";
83 gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
84 };
85
86 wan {
87 label = "dir-620-a1:amber:wan";
88 gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
89 };
90
91 wan2 {
92 label = "dir-620-a1:green:wan";
93 gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
94 };
95
96 wps {
97 label = "dir-620-a1:blue:wps";
98 gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
99 };
100
101 wps2 {
102 label = "dir-620-a1:amber:wps";
103 gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
104 };
105 };
106 };
107
108 &pinctrl {
109 state_default: pinctrl0 {
110 gpio {
111 ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
112 ralink,function = "gpio";
113 };
114 };
115 };
116
117 &ethernet {
118 mtd-mac-address = <&factory 0x4>;
119 };
120
121 &esw {
122 mediatek,portmap = <0x2f>;
123 };
124
125 &wmac {
126 ralink,mtd-eeprom = <&factory 0>;
127 };
128
129 &otg {
130 status = "okay";
131 };