target/linux/ramips/dts/DIR-620-A1.dts

   1 /dts-v1/;
   2
   3 /include/ "rt3050.dtsi"
   4
   5 / {
   6         compatible = "DIR-620-A1", "ralink,rt3050-soc";
   7         model = "D-Link DIR-620 A1";
   8
   9         palmbus@10000000 {
  10                 sysc@0 {
  11                         ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
  12                         ralink,uartmux = "gpio";
  13                         ralink,wdtmux = <1>;
  14                 };
  15
  16                 gpio0: gpio@600 {
  17                         status = "okay";
  18                 };
  19
  20         };
  21
  22         cfi@1f000000 {
  23                 compatible = "cfi-flash";
  24                 reg = <0x1f000000 0x800000>;
  25
  26                 bank-width = <2>;
  27                 device-width = <2>;
  28                 #address-cells = <1>;
  29                 #size-cells = <1>;
  30
  31                 partition@0 {
  32                         label = "u-boot";
  33                         reg = <0x0 0x30000>;
  34                         read-only;
  35                 };
  36
  37                 partition@30000 {
  38                         label = "u-boot-env";
  39                         reg = <0x30000 0x10000>;
  40                         read-only;
  41                 };
  42
  43                 factory: partition@40000 {
  44                         label = "factory";
  45                         reg = <0x40000 0x10000>;
  46                         read-only;
  47                 };
  48
  49                 partition@50000 {
  50                         label = "firmware";
  51                         reg = <0x50000 0x7b0000>;
  52                 };
  53         };
  54
  55         ethernet@10100000 {
  56                 status = "okay";
  57         };
  58
  59         esw@10110000 {
  60                 status = "okay";
  61                 ralink,portmap = <0x2f>;
  62         };
  63
  64         gpio-keys-polled {
  65                 compatible = "gpio-keys-polled";
  66                 #address-cells = <1>;
  67                 #size-cells = <0>;
  68                 poll-interval = <20>;
  69                 reset {
  70                         label = "reset";
  71                         gpios = <&gpio0 10 1>;
  72                         linux,code = <0x198>;
  73                 };
  74                 wps {
  75                         label = "wps";
  76                         gpios = <&gpio0 0 1>;
  77                         linux,code = <0x211>;
  78                 };
  79         };
  80
  81         wmac@10180000 {
  82                 status = "okay";
  83         };
  84
  85         gpio-leds {
  86                 compatible = "gpio-leds";
  87                 status {
  88                         label = "d-link:amber:status";
  89                         gpios = <&gpio0 8 1>;
  90                 };
  91                 status2 {
  92                         label = "d-link:green:status";
  93                         gpios = <&gpio0 9 1>;
  94                 };
  95                 wan {
  96                         label = "d-link:amber:wan";
  97                         gpios = <&gpio0 14 1>;
  98                 };
  99                 wan2 {
 100                         label = "d-link:green:wan";
 101                         gpios = <&gpio0 12 1>;
 102                 };
 103                 wps {
 104                         label = "d-link:blue:wps";
 105                         gpios = <&gpio0 13 0>;
 106                 };
 107                 wps2 {
 108                         label = "d-link:amber:wps";
 109                         gpios = <&gpio0 11 0>;
 110                 };
 111         };
 112
 113         otg@101c0000 {
 114                 status = "okay";
 115         };
 116 };