5c633748c307f83748be22b9be9199357a88e37a
[openwrt/staging/wigyori.git] / target / linux / ramips / dts / DIR-860L-B1.dts
1 /dts-v1/;
2
3 #include "mt7621.dtsi"
4
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
7
8 / {
9 compatible = "dlink,dir-860l-b1", "mediatek,mt7621-soc";
10 model = "D-Link DIR-860L B1";
11
12 aliases {
13 led-boot = &led_power_green;
14 led-failsafe = &led_power_green;
15 led-running = &led_power_green;
16 led-upgrade = &led_power_green;
17 };
18
19 memory@0 {
20 device_type = "memory";
21 reg = <0x0 0x8000000>;
22 };
23
24 chosen {
25 bootargs = "console=ttyS0,57600";
26 };
27
28 gpio-leds {
29 compatible = "gpio-leds";
30
31 power {
32 label = "dir-860l-b1:orange:power";
33 gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
34 };
35
36 led_power_green: power2 {
37 label = "dir-860l-b1:green:power";
38 gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
39 };
40
41 net {
42 label = "dir-860l-b1:orange:net";
43 gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
44 };
45
46 net2 {
47 label = "dir-860l-b1:green:net";
48 gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
49 };
50 };
51
52 keys {
53 compatible = "gpio-keys-polled";
54 poll-interval = <20>;
55
56 reset {
57 label = "reset";
58 gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
59 linux,code = <KEY_RESTART>;
60 };
61
62 wps {
63 label = "wps";
64 gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
65 linux,code = <KEY_WPS_BUTTON>;
66 };
67 };
68 };
69
70 &spi0 {
71 status = "okay";
72
73 m25p80@0 {
74 compatible = "jedec,spi-nor";
75 reg = <0>;
76 spi-max-frequency = <10000000>;
77 m25p,chunked-io = <32>;
78
79 partitions {
80 compatible = "fixed-partitions";
81 #address-cells = <1>;
82 #size-cells = <1>;
83
84 partition@0 {
85 label = "u-boot";
86 reg = <0x0 0x30000>;
87 read-only;
88 };
89
90 partition@30000 {
91 label = "u-boot-env";
92 reg = <0x30000 0x4000>;
93 read-only;
94 };
95
96 radio: partition@34000 {
97 label = "radio";
98 reg = <0x34000 0x4000>;
99 read-only;
100 };
101
102 factory: partition@38000 {
103 label = "factory";
104 reg = <0x38000 0x8000>;
105 read-only;
106 };
107
108 partition@40000 {
109 label = "defaults";
110 reg = <0x40000 0x10000>;
111 read-only;
112 };
113
114 partition@50000 {
115 compatible = "seama";
116 label = "firmware";
117 reg = <0x50000 0xfb0000>;
118 };
119 };
120 };
121 };
122
123 &pcie {
124 status = "okay";
125 };
126
127 &pcie0 {
128 mt76@0,0 {
129 reg = <0x0000 0 0 0 0>;
130 mediatek,mtd-eeprom = <&radio 0x2000>;
131 ieee80211-freq-limit = <5000000 6000000>;
132 };
133 };
134
135 &pcie1 {
136 mt76@0,0 {
137 reg = <0x0000 0 0 0 0>;
138 mediatek,mtd-eeprom = <&radio 0>;
139 ieee80211-freq-limit = <2400000 2500000>;
140 };
141 };
142
143 &pinctrl {
144 state_default: pinctrl0 {
145 gpio {
146 ralink,group = "i2c", "uart2", "uart3", "rgmii2", "sdhci";
147 ralink,function = "gpio";
148 };
149 };
150 };