target/linux/ramips/dts/DIR-860L-B1.dts

   1 /dts-v1/;
   2
   3 #include "mt7621.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         compatible = "dlink,dir-860l-b1", "mediatek,mt7621-soc";
   9         model = "D-Link DIR-860L B1";
  10
  11         memory@0 {
  12                 device_type = "memory";
  13                 reg = <0x0 0x8000000>;
  14         };
  15
  16         chosen {
  17                 bootargs = "console=ttyS0,57600";
  18         };
  19
  20         gpio-leds {
  21                 compatible = "gpio-leds";
  22
  23                 power {
  24                         label = "dir-860l-b1:orange:power";
  25                         gpios = <&gpio0 13 1>;
  26                 };
  27
  28                 power2 {
  29                         label = "dir-860l-b1:green:power";
  30                         gpios = <&gpio0 15 1>;
  31                 };
  32
  33                 net {
  34                         label = "dir-860l-b1:orange:net";
  35                         gpios = <&gpio0 14 1>;
  36                 };
  37
  38                 net2 {
  39                         label = "dir-860l-b1:green:net";
  40                         gpios = <&gpio0 16 1>;
  41                 };
  42         };
  43
  44         gpio-keys-polled {
  45                 compatible = "gpio-keys-polled";
  46                 #address-cells = <1>;
  47                 #size-cells = <0>;
  48                 poll-interval = <20>;
  49
  50                 reset {
  51                         label = "reset";
  52                         gpios = <&gpio0 7 1>;
  53                         linux,code = <KEY_RESTART>;
  54                 };
  55
  56                 wps {
  57                         label = "wps";
  58                         gpios = <&gpio0 18 1>;
  59                         linux,code = <KEY_WPS_BUTTON>;
  60                 };
  61         };
  62 };
  63
  64 &spi0 {
  65         status = "okay";
  66
  67         m25p80@0 {
  68                 #address-cells = <1>;
  69                 #size-cells = <1>;
  70                 compatible = "jedec,spi-nor";
  71                 reg = <0>;
  72                 spi-max-frequency = <10000000>;
  73                 m25p,chunked-io = <32>;
  74
  75                 partition@0 {
  76                         label = "u-boot";
  77                         reg = <0x0 0x30000>;
  78                         read-only;
  79                 };
  80
  81                 partition@30000 {
  82                         label = "u-boot-env";
  83                         reg = <0x30000 0x4000>;
  84                         read-only;
  85                 };
  86
  87                 radio: partition@34000 {
  88                         label = "radio";
  89                         reg = <0x34000 0x4000>;
  90                         read-only;
  91                 };
  92
  93                 factory: partition@38000 {
  94                         label = "factory";
  95                         reg = <0x38000 0x8000>;
  96                         read-only;
  97                 };
  98
  99                 partition@40000 {
 100                         label = "defaults";
 101                         reg = <0x40000 0x10000>;
 102                         read-only;
 103                 };
 104
 105                 partition@50000 {
 106                         label = "firmware";
 107                         reg = <0x50000 0xfb0000>;
 108                 };
 109         };
 110 };
 111
 112 &pcie {
 113         status = "okay";
 114
 115         pcie0 {
 116                 mt76@0,0 {
 117                         reg = <0x0000 0 0 0 0>;
 118                         device_type = "pci";
 119                         mediatek,mtd-eeprom = <&radio 0x2000>;
 120                         ieee80211-freq-limit = <5000000 6000000>;
 121                 };
 122         };
 123
 124         pcie1 {
 125                 mt76@1,0 {
 126                         reg = <0x0000 0 0 0 0>;
 127                         device_type = "pci";
 128                         mediatek,mtd-eeprom = <&radio 0>;
 129                         ieee80211-freq-limit = <2400000 2500000>;
 130                 };
 131         };
 132 };
 133
 134 &pinctrl {
 135         state_default: pinctrl0 {
 136                 gpio {
 137                         ralink,group = "i2c", "uart2", "uart3", "rgmii2", "sdhci";
 138                         ralink,function = "gpio";
 139                 };
 140         };
 141 };