ed1f178f1617000f2cd4bd64443ab03d98f10dea
[openwrt/staging/wigyori.git] / target / linux / ramips / dts / E1700.dts
1 /*
2 * Device Tree file for the Linksys E1700
3 *
4 * Copyright (C) 2014 Imre Kaloz <kaloz@openwrt.org>
5 *
6 * This file is licensed under the terms of the GNU General Public
7 * License version 2. This program is licensed "as is" without any
8 * warranty of any kind, whether express or implied.
9 */
10
11 /dts-v1/;
12
13 #include "mt7620a.dtsi"
14
15 / {
16 compatible = "linksys,e1700", "ralink,mt7620a-soc";
17 model = "Linksys E1700";
18
19 gpio-keys-polled {
20 compatible = "gpio-keys-polled";
21 #address-cells = <1>;
22 #size-cells = <0>;
23 poll-interval = <20>;
24
25 reset {
26 label = "reset";
27 gpios = <&gpio0 1 0>;
28 linux,code = <0x198>;
29 };
30
31 wps {
32 label = "wps";
33 gpios = <&gpio0 2 0>;
34 linux,code = <0x211>;
35 };
36 };
37
38 gpio-leds {
39 compatible = "gpio-leds";
40
41 power {
42 label = "e1700:green:power";
43 gpios = <&gpio0 10 1>;
44 };
45
46 wan {
47 label = "e1700:green:wps";
48 gpios = <&gpio0 12 1>;
49 };
50 };
51 };
52
53 &spi0 {
54 status = "okay";
55
56 m25p80@0 {
57 #address-cells = <1>;
58 #size-cells = <1>;
59 compatible = "jedec,spi-nor";
60 reg = <0 0>;
61 linux,modalias = "m25p80", "mx25l6405d";
62 spi-max-frequency = <10000000>;
63
64 partition@0 {
65 label = "u-boot";
66 reg = <0x0 0x30000>;
67 read-only;
68 };
69
70 partition@30000 {
71 label = "config";
72 reg = <0x30000 0x10000>;
73 read-only;
74 };
75
76 factory: partition@40000 {
77 label = "factory";
78 reg = <0x40000 0x10000>;
79 read-only;
80 };
81
82 partition@50000 {
83 label = "firmware";
84 reg = <0x50000 0x7b0000>;
85 };
86 };
87 };
88
89 &pinctrl {
90 state_default: pinctrl0 {
91 gpio {
92 ralink,group = "i2c", "uartf";
93 ralink,function = "gpio";
94 };
95 };
96 };
97
98 &ethernet {
99 status = "okay";
100 mtd-mac-address = <&factory 0x28>;
101 pinctrl-names = "default";
102 pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
103
104 port@5 {
105 status = "okay";
106 mediatek,fixed-link = <1000 1 1 1>;
107 phy-mode = "rgmii";
108 };
109
110 mdio-bus {
111 status = "okay";
112
113 phy0: ethernet-phy@0 {
114 reg = <0>;
115 phy-mode = "rgmii";
116 };
117
118 phy1: ethernet-phy@1 {
119 reg = <1>;
120 phy-mode = "rgmii";
121 };
122
123 phy2: ethernet-phy@2 {
124 reg = <2>;
125 phy-mode = "rgmii";
126 };
127
128 phy3: ethernet-phy@3 {
129 reg = <3>;
130 phy-mode = "rgmii";
131 };
132
133 phy4: ethernet-phy@4 {
134 reg = <4>;
135 phy-mode = "rgmii";
136 };
137
138 phy1f: ethernet-phy@1f {
139 reg = <0x1f>;
140 phy-mode = "rgmii";
141 };
142 };
143 };
144
145 &gsw {
146 mediatek,port4 = "gmac";
147 mediatek,mt7530 = <1>;
148 };
149
150 &wmac {
151 ralink,mtd-eeprom = <&factory 0>;
152 };