target/linux/ramips/dts/F5D8235_V2.dts

   1 /dts-v1/;
   2
   3 #include "rt3050.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "belkin,f5d8235-v2", "ralink,rt3052-soc";
  10         model = "Belkin F5D8235 v2";
  11
  12         aliases {
  13                 led-status = &led_router;
  14         };
  15
  16         cfi@1f000000 {
  17                 compatible = "cfi-flash";
  18                 reg = <0x1f000000 0x800000>;
  19                 bank-width = <2>;
  20                 device-width = <2>;
  21
  22                 partitions {
  23                         compatible = "fixed-partitions";
  24                         #address-cells = <1>;
  25                         #size-cells = <1>;
  26
  27                         uboot: partition@0 {
  28                                 label = "uboot";
  29                                 reg = <0x0 0x50000>;
  30                                 read-only;
  31                         };
  32
  33                         partition@50000 {
  34                                 label = "firmware";
  35                                 reg = <0x50000 0x790000>;
  36                         };
  37
  38                         partition@7e0000 {
  39                                 label = "nvram";
  40                                 reg = <0x7e0000 0x10000>;
  41                         };
  42
  43                         factory: partition@7f0000 {
  44                                 label = "factory";
  45                                 reg = <0x7f0000 0x10000>;
  46                         };
  47                 };
  48         };
  49
  50         rtl8366rb {
  51                 compatible = "realtek,rtl8366rb";
  52                 gpio-sda = <&gpio0 1 GPIO_ACTIVE_HIGH>;
  53                 gpio-sck = <&gpio0 2 GPIO_ACTIVE_HIGH>;
  54         };
  55
  56         gpio-leds {
  57                 compatible = "gpio-leds";
  58
  59                 internet {
  60                         label = "f5d8235-v2:blue:internet";
  61                         gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
  62                 };
  63
  64                 internet2 {
  65                         label = "f5d8235-v2:amber:internet";
  66                         gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
  67                 };
  68
  69                 modem {
  70                         label = "f5d8235-v2:blue:modem";
  71                         gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
  72                 };
  73
  74                 modem2 {
  75                         label = "f5d8235-v2:amber:modem";
  76                         gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
  77                 };
  78
  79                 led_router: router {
  80                         label = "f5d8235-v2:blue:router";
  81                         gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
  82                 };
  83
  84                 storage {
  85                         label = "f5d8235-v2:blue:storage";
  86                         gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
  87                 };
  88
  89                 storage2 {
  90                         label = "f5d8235-v2:amber:storage";
  91                         gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
  92                 };
  93
  94                 security {
  95                         label = "f5d8235-v2:blue:security";
  96                         gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
  97                 };
  98
  99                 security2 {
 100                         label = "f5d8235-v2:amber:security";
 101                         gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
 102                 };
 103         };
 104 };
 105
 106 &pinctrl {
 107         state_default: pinctrl0 {
 108                 gpio {
 109                         ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
 110                         ralink,function = "gpio";
 111                 };
 112         };
 113 };
 114
 115 &ethernet {
 116         mtd-mac-address = <&uboot 0x40004>;
 117 };
 118
 119 &esw {
 120         mediatek,portmap = <0x3f>;
 121 };
 122
 123 &wmac {
 124         ralink,mtd-eeprom = <&uboot 0x40000>;
 125 };
 126
 127 &otg {
 128         status = "okay";
 129 };