2f9d80ecc22aeff31b8af6b8d412a593fbeb2b66
[openwrt/staging/wigyori.git] / target / linux / ramips / dts / FREESTATION5.dts
1 /dts-v1/;
2
3 #include "rt3050.dtsi"
4
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
7
8 / {
9 compatible = "arcwireless,freestation5", "ralink,rt3050-soc";
10 model = "ARC FreeStation5";
11
12 chosen {
13 bootargs = "console=ttyS0,115200";
14 };
15
16 cfi@1f000000 {
17 compatible = "cfi-flash";
18 reg = <0x1f000000 0x800000>;
19 bank-width = <2>;
20 device-width = <2>;
21
22 partitions {
23 compatible = "fixed-partitions";
24 #address-cells = <1>;
25 #size-cells = <1>;
26
27 partition@0 {
28 label = "u-boot";
29 reg = <0x0 0x30000>;
30 read-only;
31 };
32
33 partition@30000 {
34 label = "u-boot-env";
35 reg = <0x30000 0x10000>;
36 read-only;
37 };
38
39 factory: partition@40000 {
40 label = "factory";
41 reg = <0x40000 0x10000>;
42 read-only;
43 };
44
45 partition@50000 {
46 compatible = "denx,uimage";
47 label = "firmware";
48 reg = <0x50000 0x7b0000>;
49 };
50 };
51 };
52
53 gpio-export {
54 compatible = "gpio-export";
55
56 /*
57 * Used to enable power-over-ethernet passthrough from port0 to port1.
58 * Disable passthrough by default to prevent accidental equipment damage.
59 */
60 poe {
61 gpio-export,name = "poe-passthrough";
62 gpio-export,output = <1>;
63 gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
64 };
65 };
66
67 gpio-leds {
68 compatible = "gpio-leds";
69
70 /*
71 * The following leds are defined in the ArcOS firmware, but reportedly
72 * not present in the Freestation5 device.
73 */
74 wifi {
75 label = "freestation5:unknown:wifi";
76 gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
77 };
78
79 powerg {
80 label = "freestation5:unknown:powerg";
81 gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
82 };
83
84 usb {
85 label = "freestation5:unknown:usb";
86 gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
87 };
88 };
89 };
90
91 &pinctrl {
92 state_default: pinctrl0 {
93 gpio {
94 ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
95 ralink,function = "gpio";
96 };
97 };
98 };
99
100 &ethernet {
101 mtd-mac-address = <&factory 0x4>;
102 };
103
104 &esw {
105 mediatek,portmap = <0x01>;
106 };
107
108 &wmac {
109 ralink,mtd-eeprom = <&factory 0>;
110 };
111
112 &otg {
113 status = "okay";
114 };