e4323c2e7f33783328f89830c3a7ba91bcb2ec49
[openwrt/staging/wigyori.git] / target / linux / ramips / dts / GL-MT300N.dts
1 /dts-v1/;
2
3 #include "mt7620a.dtsi"
4
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
7
8 / {
9 compatible = "glinet,gl-mt300n", "ralink,mt7620a-soc";
10 model = "GL-MT300N";
11
12 chosen {
13 bootargs = "console=ttyS0,115200";
14 };
15
16 gpio-leds {
17 compatible = "gpio-leds";
18
19 wan {
20 label = "gl-mt300n:wan";
21 gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
22 };
23
24 lan {
25 label = "gl-mt300n:lan";
26 gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
27 };
28
29 wlan {
30 label = "gl-mt300n:wlan";
31 gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
32 };
33 };
34
35 keys {
36 compatible = "gpio-keys-polled";
37 poll-interval = <20>;
38 reset {
39 label = "reset";
40 gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
41 linux,code = <KEY_RESTART>;
42 };
43
44 BTN_0 {
45 label = "BTN_0";
46 gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
47 linux,code = <BTN_0>;
48 };
49
50 BTN_1 {
51 label = "BTN_1";
52 gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
53 linux,code = <BTN_1>;
54 };
55 };
56 };
57
58 &gpio0 {
59 status = "okay";
60 };
61
62 &gpio1 {
63 status = "okay";
64 };
65
66 &gpio2 {
67 status = "okay";
68 };
69
70 &gpio3 {
71 status = "okay";
72 };
73
74 &spi0 {
75 status = "okay";
76
77 m25p80@0 {
78 compatible = "jedec,spi-nor";
79 reg = <0>;
80 spi-max-frequency = <10000000>;
81
82 partitions {
83 compatible = "fixed-partitions";
84 #address-cells = <1>;
85 #size-cells = <1>;
86
87 partition@0 {
88 label = "u-boot";
89 reg = <0x0 0x30000>;
90 };
91
92 partition@30000 {
93 label = "u-boot-env";
94 reg = <0x30000 0x10000>;
95 read-only;
96 };
97
98 factory: partition@40000 {
99 label = "factory";
100 reg = <0x40000 0x10000>;
101 read-only;
102 };
103
104 partition@50000 {
105 compatible = "denx,uimage";
106 label = "firmware";
107 reg = <0x50000 0xf80000>;
108 };
109
110 partition@ff0000 {
111 label = "art";
112 reg = <0xff0000 0x10000>;
113 };
114 };
115 };
116 };
117
118 &ehci {
119 status = "okay";
120 };
121
122 &ohci {
123 status = "okay";
124 };
125
126 &ethernet {
127 mtd-mac-address = <&factory 0x4000>;
128 mediatek,portmap = "wllll";
129 };
130
131 &wmac {
132 ralink,mtd-eeprom = <&factory 0>;
133 };
134
135 &pinctrl {
136 state_default: pinctrl0 {
137 gpio {
138 ralink,group = "wled","ephy","i2c";
139 ralink,function = "gpio";
140 };
141 };
142 };