target/linux/ramips/dts/JHR-N926R.dts

   1 /dts-v1/;
   2
   3 #include "rt3050.dtsi"
   4
   5 / {
   6         compatible = "JHR-N926R", "ralink,rt3052-soc";
   7         model = "JCG JHR-N926R";
   8
   9         pinctrl {
  10                 state_default: pinctrl0 {
  11                         gpio {
  12                                 ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
  13                                 ralink,function = "gpio";
  14                         };
  15                 };
  16         };
  17
  18         cfi@1f000000 {
  19                 compatible = "cfi-flash";
  20                 reg = <0x1f000000 0x800000>;
  21                 bank-width = <2>;
  22                 device-width = <2>;
  23                 #address-cells = <1>;
  24                 #size-cells = <1>;
  25
  26                 partition@0 {
  27                         label = "u-boot";
  28                         reg = <0x0 0x30000>;
  29                         read-only;
  30                 };
  31
  32                 partition@30000 {
  33                         label = "u-boot-env";
  34                         reg = <0x30000 0x10000>;
  35                         read-only;
  36                 };
  37
  38                 factory: partition@40000 {
  39                         label = "factory";
  40                         reg = <0x40000 0x10000>;
  41                         read-only;
  42                 };
  43
  44                 partition@50000 {
  45                         label = "firmware";
  46                         reg = <0x50000 0x3b0000>;
  47                 };
  48         };
  49
  50         ethernet@10100000 {
  51                 mtd-mac-address = <&factory 0x2e>;
  52         };
  53
  54         esw@10110000 {
  55                 mediatek,portmap = <0x3e>;
  56         };
  57
  58         wmac@10180000 {
  59                 ralink,mtd-eeprom = <&factory 0>;
  60         };
  61
  62         gpio-leds {
  63                 compatible = "gpio-leds";
  64
  65                 wlan1 {
  66                         label = "jhr-n926r:red:wlan";
  67                         gpios = <&gpio0 20 1>;
  68                 };
  69
  70                 wlan2 {
  71                         label = "jhr-n926r:yellow:wlan";
  72                         gpios = <&gpio0 19 1>;
  73                 };
  74
  75                 wlan3 {
  76                         label = "jhr-n926r:green:wlan";
  77                         gpios = <&gpio0 17 1>;
  78                 };
  79
  80                 system {
  81                         label = "jhr-n926r:blue:system";
  82                         gpios = <&gpio0 13 1>;
  83                 };
  84         };
  85
  86         gpio_export {
  87                 compatible = "gpio-export";
  88                 #size-cells = <0>;
  89
  90                 display_data {
  91                         gpio-export,name = "display_data";
  92                         gpio-export,output = <1>;
  93                         gpios = <&gpio0 7 1>;
  94                 };
  95
  96                 display_clock {
  97                         gpio-export,name = "display_clock";
  98                         gpio-export,output = <1>;
  99                         gpios = <&gpio0 8 0>;
 100                 };
 101
 102                 display_blank {
 103                         gpio-export,name = "display_blank";
 104                         gpio-export,output = <1>;
 105                         gpios = <&gpio0 11 0>;
 106                 };
 107         };
 108
 109         gpio-keys-polled {
 110                 compatible = "gpio-keys-polled";
 111                 #address-cells = <1>;
 112                 #size-cells = <0>;
 113                 poll-interval = <20>;
 114
 115                 reset_wps {
 116                         label = "reset_wps";
 117                         gpios = <&gpio0 10 1>;
 118                         linux,code = <0x198>;
 119                 };
 120
 121                 wlan {
 122                         label = "wlan";
 123                         gpios = <&gpio0 1 1>;
 124                         linux,code = <0x100>;
 125                 };
 126         };
 127 };