target/linux/ramips/dts/M2M.dts

   1 /dts-v1/;
   2
   3 #include "rt5350.dtsi"
   4
   5 / {
   6         compatible = "M2M", "ralink,rt5350-soc";
   7         model = "Intenso Memory 2 Move";
   8
   9         chosen {
  10                 bootargs = "console=ttyS0,57600n8 root=/dev/mtdblock5";
  11         };
  12
  13         gpio-leds {
  14                 compatible = "gpio-leds";
  15
  16                 wifi {
  17                         label = "m2m:blue:wifi";
  18                         gpios = <&gpio0 7 1>;
  19                 };
  20
  21                 wan {
  22                         label = "m2m:green:wan";
  23                         gpios = <&gpio0 12 1>;
  24                 };
  25         };
  26
  27         gpio-keys-polled {
  28                 compatible = "gpio-keys-polled";
  29                 #address-cells = <1>;
  30                 #size-cells = <0>;
  31                 poll-interval = <20>;
  32
  33                 power {
  34                         label = "power";
  35                         gpios = <&gpio0 1 1>;
  36                         linux,code = <0x116>;
  37                 };
  38
  39                 reset {
  40                         label = "reset";
  41                         gpios = <&gpio0 10 1>;
  42                         linux,code = <0x198>;
  43                 };
  44         };
  45 };
  46
  47 &spi0 {
  48         status = "okay";
  49
  50         m25p80@0 {
  51                 #address-cells = <1>;
  52                 #size-cells = <1>;
  53                 compatible = "jedec,spi-nor";
  54                 reg = <0 0>;
  55                 linux,modalias = "m25p80", "mx25l6405d";
  56                 spi-max-frequency = <10000000>;
  57
  58                 partition@0 {
  59                         label = "Bootloader";
  60                         reg = <0x0 0x30000>;
  61                         read-only;
  62                 };
  63
  64                 partition@30000 {
  65                         label = "Config";
  66                         reg = <0x30000 0x10000>;
  67                         read-only;
  68                 };
  69
  70                 factory: partition@40000 {
  71                         label = "Factory";
  72                         reg = <0x40000 0x10000>;
  73                         read-only;
  74                 };
  75
  76                 partition@50000 {
  77                         label = "firmware";
  78                         reg = <0x50000 0x7b0000>;
  79                 };
  80         };
  81 };
  82
  83 &pinctrl {
  84         state_default: pinctrl0 {
  85                 gpio {
  86                         ralink,group = "i2c", "uartf";
  87                         ralink,function = "gpio";
  88                 };
  89         };
  90 };
  91
  92 &ethernet {
  93         mtd-mac-address = <&factory 0x28>;
  94 };
  95
  96 &esw {
  97         mediatek,portmap = <0x2f>;
  98 };
  99
 100 &ehci {
 101         status = "okay";
 102 };
 103
 104 &ohci {
 105         status = "okay";
 106 };
 107
 108 &wmac {
 109         ralink,mtd-eeprom = <&factory 0x0>;
 110 };