target/linux/ramips/dts/MINIEMBPLUG.dts

   1 /dts-v1/;
   2
   3 #include "rt5350.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         compatible = "MINIEMBPLUG", "ralink,rt5350-soc";
   9         model = "Omnima MiniEMBPlug";
  10
  11         gpio-leds {
  12                 compatible = "gpio-leds";
  13
  14                 wlan {
  15                         label = "miniembplug:red:wlan";
  16                         gpios = <&gpio0 9 0>;
  17                 };
  18
  19                 mobile {
  20                         label = "miniembplug:green:mobile";
  21                         gpios = <&gpio0 13 1>;
  22                 };
  23         };
  24
  25         gpio-keys-polled {
  26                 compatible = "gpio-keys-polled";
  27                 #address-cells = <1>;
  28                 #size-cells = <0>;
  29                 poll-interval = <20>;
  30
  31                 wps {
  32                         label = "wps";
  33                         gpios = <&gpio0 0 1>;
  34                         linux,code = <KEY_WPS_BUTTON>;
  35                 };
  36
  37                 reset {
  38                         label = "reset";
  39                         gpios = <&gpio0 10 1>;
  40                         linux,code = <KEY_WPS_BUTTON>;
  41                 };
  42
  43                 mode-one {
  44                         label = "mode1";
  45                         gpios = <&gpio0 11 1>;
  46                         linux,code = <KEY_WPS_BUTTON>;
  47                 };
  48
  49                 mode-two {
  50                         label = "mode2";
  51                         gpios = <&gpio0 12 1>;
  52                         linux,code = <KEY_WPS_BUTTON>;
  53                 };
  54         };
  55 };
  56
  57 &pinctrl {
  58         state_default: pinctrl0 {
  59                 gpio {
  60                         ralink,group = "i2c", "jtag", "uartf";
  61                         ralink,function = "gpio";
  62                 };
  63         };
  64 };
  65
  66 &gpio0 {
  67         status = "okay";
  68 };
  69
  70 &spi0 {
  71         status = "okay";
  72
  73         m25p80@0 {
  74                 #address-cells = <1>;
  75                 #size-cells = <1>;
  76                 compatible = "jedec,spi-nor";
  77                 reg = <0>;
  78                 spi-max-frequency = <10000000>;
  79
  80                 partition@0 {
  81                         label = "u-boot";
  82                         reg = <0x0 0x30000>;
  83                         read-only;
  84                 };
  85
  86                 partition@30000 {
  87                         label = "u-boot-env";
  88                         reg = <0x30000 0x10000>;
  89                         read-only;
  90                 };
  91
  92                 factory: partition@40000 {
  93                         label = "factory";
  94                         reg = <0x40000 0x10000>;
  95                         read-only;
  96                 };
  97
  98                 partition@50000 {
  99                         label = "firmware";
 100                         reg = <0x50000 0x7b0000>;
 101                 };
 102         };
 103 };
 104
 105 &ethernet {
 106         mtd-mac-address = <&factory 0x4>;
 107 };
 108
 109 &esw {
 110         mediatek,portmap = <0x2f>;
 111 };
 112
 113 &wmac {
 114         ralink,mtd-eeprom = <&factory 0>;
 115 };
 116
 117 &ehci {
 118         status = "okay";
 119 };
 120
 121 &ohci {
 122         status = "okay";
 123 };