ramips: dts: Unify naming of gpio-led nodes
[openwrt/staging/wigyori.git] / target / linux / ramips / dts / MINIEMBPLUG.dts
1 /dts-v1/;
2
3 #include "rt5350.dtsi"
4
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
7
8 / {
9 compatible = "omnima,miniembplug", "ralink,rt5350-soc";
10 model = "Omnima MiniEMBPlug";
11
12 leds {
13 compatible = "gpio-leds";
14
15 wlan {
16 label = "miniembplug:red:wlan";
17 gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
18 };
19
20 mobile {
21 label = "miniembplug:green:mobile";
22 gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
23 trigger-sources = <&ohci_port1>, <&ehci_port1>;
24 linux,default-trigger = "usbport";
25 };
26 };
27
28 keys {
29 compatible = "gpio-keys-polled";
30 poll-interval = <20>;
31
32 wps {
33 label = "wps";
34 gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
35 linux,code = <KEY_WPS_BUTTON>;
36 };
37
38 reset {
39 label = "reset";
40 gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
41 linux,code = <KEY_WPS_BUTTON>;
42 };
43
44 mode-one {
45 label = "mode1";
46 gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
47 linux,code = <KEY_WPS_BUTTON>;
48 };
49
50 mode-two {
51 label = "mode2";
52 gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
53 linux,code = <KEY_WPS_BUTTON>;
54 };
55 };
56 };
57
58 &pinctrl {
59 state_default: pinctrl0 {
60 gpio {
61 ralink,group = "i2c", "jtag", "uartf";
62 ralink,function = "gpio";
63 };
64 };
65 };
66
67 &gpio0 {
68 status = "okay";
69 };
70
71 &spi0 {
72 status = "okay";
73
74 m25p80@0 {
75 compatible = "jedec,spi-nor";
76 reg = <0>;
77 spi-max-frequency = <10000000>;
78
79 partitions {
80 compatible = "fixed-partitions";
81 #address-cells = <1>;
82 #size-cells = <1>;
83
84 partition@0 {
85 label = "u-boot";
86 reg = <0x0 0x30000>;
87 read-only;
88 };
89
90 partition@30000 {
91 label = "u-boot-env";
92 reg = <0x30000 0x10000>;
93 read-only;
94 };
95
96 factory: partition@40000 {
97 label = "factory";
98 reg = <0x40000 0x10000>;
99 read-only;
100 };
101
102 partition@50000 {
103 compatible = "denx,uimage";
104 label = "firmware";
105 reg = <0x50000 0x7b0000>;
106 };
107 };
108 };
109 };
110
111 &ethernet {
112 mtd-mac-address = <&factory 0x4>;
113 };
114
115 &esw {
116 mediatek,portmap = <0x2f>;
117 };
118
119 &wmac {
120 ralink,mtd-eeprom = <&factory 0>;
121 };
122
123 &ehci {
124 status = "okay";
125 };
126
127 &ohci {
128 status = "okay";
129 };