target/linux/ramips/dts/MT7620a_MT7610e.dts

   1 /dts-v1/;
   2
   3 #include "mt7620a.dtsi"
   4
   5 / {
   6         compatible = "ralink,mt7620a-eval-board", "ralink,mt7620a-soc";
   7         model = "Ralink MT7620A evaluation board";
   8
   9         gpio-keys-polled {
  10                 compatible = "gpio-keys";
  11                 #address-cells = <1>;
  12                 #size-cells = <0>;
  13                 poll-interval = <20>;
  14
  15                 wps {
  16                         label = "wps";
  17                         gpios = <&gpio0 12 1>;
  18                         linux,code = <0x100>;
  19                 };
  20
  21                 reset {
  22                         label = "reset";
  23                         gpios = <&gpio0 13 1>;
  24                         linux,code = <0x101>;
  25                 };
  26         };
  27 };
  28
  29 &gpio0 {
  30         status = "okay";
  31 };
  32
  33 &spi0 {
  34         status = "okay";
  35
  36         m25p80@0 {
  37                 #address-cells = <1>;
  38                 #size-cells = <1>;
  39                 compatible = "jedec,spi-nor";
  40                 reg = <0>;
  41                 linux,modalias = "m25p80", "en25q64";
  42                 spi-max-frequency = <1000000>;
  43
  44                 partition@0 {
  45                         label = "u-boot";
  46                         reg = <0x0 0x30000>;
  47                         read-only;
  48                 };
  49
  50                 partition@30000 {
  51                         label = "u-boot-env";
  52                         reg = <0x30000 0x10000>;
  53                         read-only;
  54                 };
  55
  56                 factory: partition@40000 {
  57                         label = "factory";
  58                         reg = <0x40000 0x10000>;
  59                         read-only;
  60                 };
  61
  62                 partition@50000 {
  63                         label = "firmware";
  64                         reg = <0x50000 0x7b0000>;
  65                 };
  66         };
  67 };
  68
  69 &ethernet {
  70         status = "okay";
  71         pinctrl-names = "default";
  72         pinctrl-0 = <&ephy_pins>;
  73         mediatek,portmap = "llllw";
  74 };
  75
  76 &gsw {
  77         mediatek,port4 = "ephy";
  78 };
  79
  80 &sdhci {
  81         status = "okay";
  82 };
  83
  84 &pcie {
  85         status = "okay";
  86 };