ramips: fix size-cells on spi nodes
[openwrt/staging/wigyori.git] / target / linux / ramips / dts / MT7620a_MT7610e.dts
1 /dts-v1/;
2
3 #include "mt7620a.dtsi"
4
5 / {
6 compatible = "ralink,mt7620a-eval-board", "ralink,mt7620a-soc";
7 model = "Ralink MT7620A evaluation board";
8
9 gpio-keys-polled {
10 compatible = "gpio-keys";
11 #address-cells = <1>;
12 #size-cells = <0>;
13 poll-interval = <20>;
14
15 wps {
16 label = "wps";
17 gpios = <&gpio0 12 1>;
18 linux,code = <0x100>;
19 };
20
21 reset {
22 label = "reset";
23 gpios = <&gpio0 13 1>;
24 linux,code = <0x101>;
25 };
26 };
27 };
28
29 &gpio0 {
30 status = "okay";
31 };
32
33 &spi0 {
34 status = "okay";
35
36 m25p80@0 {
37 #address-cells = <1>;
38 #size-cells = <1>;
39 compatible = "jedec,spi-nor";
40 reg = <0>;
41 linux,modalias = "m25p80", "en25q64";
42 spi-max-frequency = <1000000>;
43
44 partition@0 {
45 label = "u-boot";
46 reg = <0x0 0x30000>;
47 read-only;
48 };
49
50 partition@30000 {
51 label = "u-boot-env";
52 reg = <0x30000 0x10000>;
53 read-only;
54 };
55
56 factory: partition@40000 {
57 label = "factory";
58 reg = <0x40000 0x10000>;
59 read-only;
60 };
61
62 partition@50000 {
63 label = "firmware";
64 reg = <0x50000 0x7b0000>;
65 };
66 };
67 };
68
69 &ethernet {
70 status = "okay";
71 pinctrl-names = "default";
72 pinctrl-0 = <&ephy_pins>;
73 mediatek,portmap = "llllw";
74 };
75
76 &gsw {
77 mediatek,port4 = "ephy";
78 };
79
80 &sdhci {
81 status = "okay";
82 };
83
84 &pcie {
85 status = "okay";
86 };