target/linux/ramips/dts/MT7620a_MT7610e.dts

   1 /dts-v1/;
   2
   3 #include "mt7620a.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "ralink,mt7620a-eval-board", "ralink,mt7620a-soc";
  10         model = "Ralink MT7620A evaluation board";
  11
  12         keys {
  13                 compatible = "gpio-keys";
  14                 poll-interval = <20>;
  15
  16                 wps {
  17                         label = "wps";
  18                         gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
  19                         linux,code = <BTN_0>;
  20                 };
  21
  22                 reset {
  23                         label = "reset";
  24                         gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
  25                         linux,code = <BTN_1>;
  26                 };
  27         };
  28 };
  29
  30 &gpio0 {
  31         status = "okay";
  32 };
  33
  34 &spi0 {
  35         status = "okay";
  36
  37         m25p80@0 {
  38                 compatible = "jedec,spi-nor";
  39                 reg = <0>;
  40                 spi-max-frequency = <1000000>;
  41
  42                 partitions {
  43                         compatible = "fixed-partitions";
  44                         #address-cells = <1>;
  45                         #size-cells = <1>;
  46
  47                         partition@0 {
  48                                 label = "u-boot";
  49                                 reg = <0x0 0x30000>;
  50                                 read-only;
  51                         };
  52
  53                         partition@30000 {
  54                                 label = "u-boot-env";
  55                                 reg = <0x30000 0x10000>;
  56                                 read-only;
  57                         };
  58
  59                         factory: partition@40000 {
  60                                 label = "factory";
  61                                 reg = <0x40000 0x10000>;
  62                                 read-only;
  63                         };
  64
  65                         partition@50000 {
  66                                 compatible = "denx,uimage";
  67                                 label = "firmware";
  68                                 reg = <0x50000 0x7b0000>;
  69                         };
  70                 };
  71         };
  72 };
  73
  74 &ethernet {
  75         status = "okay";
  76         pinctrl-names = "default";
  77         pinctrl-0 = <&ephy_pins>;
  78         mediatek,portmap = "llllw";
  79 };
  80
  81 &gsw {
  82         mediatek,port4 = "ephy";
  83 };
  84
  85 &sdhci {
  86         status = "okay";
  87 };
  88
  89 &pcie {
  90         status = "okay";
  91 };