target/linux/ramips/dts/MZK-W300NH2.dts

   1 /dts-v1/;
   2
   3 /include/ "rt3050.dtsi"
   4
   5 / {
   6         #address-cells = <1>;
   7         #size-cells = <1>;
   8         compatible = "MZK-W300NH2", "ralink,rt3052-soc";
   9         model = "Planex MZK-W300NH2";
  10
  11         memorydetect {
  12                 ralink,memory = <0x0 0x200000 0x4000000>;
  13         };
  14
  15         chosen {
  16                 bootargs = "console=ttyS0,57600 mtdparts=1f000000.cfi:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,128k@0x3e0000(cimage)ro,3648k@0x50000(firmware)";
  17         };
  18
  19         palmbus@10000000 {
  20                 sysc@0 {
  21                         ralink,pinmux = "uartlite", "mdio", "sdram", "rgmii";
  22                         ralink,gpiomux = "i2c", "spi", "jtag";
  23                         ralink,uartmux = "gpio";
  24                         ralink,wdtmux = <1>;
  25                 };
  26
  27                 gpio0: gpio@600 {
  28                         status = "okay";
  29                 };
  30         };
  31
  32         cfi@1f000000 {
  33                 compatible = "cfi-flash";
  34                 reg = <0x1f000000 0x800000>;
  35
  36                 bank-width = <2>;
  37                 device-width = <2>;
  38                 #address-cells = <1>;
  39                 #size-cells = <1>;
  40         };
  41
  42         ethernet@10100000 {
  43                 status = "okay";
  44         };
  45
  46         esw@10110000 {
  47                 status = "okay";
  48                 ralink,portmap = <0x2f>;
  49         };
  50
  51         gpio-leds {
  52                 compatible = "gpio-leds";
  53                 power {
  54                         label = "mzkw300nh2:green:power";
  55                         gpios = <&gpio0 9 1>;
  56                 };
  57                 wlan {
  58                         label = "mzkw300nh2:amber:wlan";
  59                         gpios = <&gpio0 14 1>;
  60                 };
  61                 wps {
  62                         label = "mzkw300nh2:amber:wps";
  63                         gpios = <&gpio0 11 1>;
  64                 };
  65         };
  66
  67         gpio-keys-polled {
  68                 compatible = "gpio-keys-polled";
  69                 #address-cells = <1>;
  70                 #size-cells = <0>;
  71                 poll-interval = <20>;
  72                 wps {
  73                         label = "wps";
  74                         gpios = <&gpio0 12 1>;
  75                         linux,code = <0x211>;
  76                 };
  77                 reset {
  78                         label = "reset";
  79                         gpios = <&gpio0 0 1>;
  80                         linux,code = <0x198>;
  81                 };
  82                 rt {
  83                         label = "rt";
  84                         gpios = <&gpio0 13 1>;
  85                         linux,code = <0x100>;
  86                 };
  87         };
  88
  89         wmac@10180000 {
  90                 status = "okay";
  91         };
  92 };