fa3f53aa1f5f5e05359ebf40975ecfcc0973a697
[openwrt/staging/wigyori.git] / target / linux / ramips / dts / Newifi-D1.dts
1 /dts-v1/;
2
3 #include "mt7621.dtsi"
4
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
7
8 / {
9 compatible = "lenovo,newifi-d1", "mediatek,mt7621-soc";
10 model = "Newifi-D1";
11
12 aliases {
13 led-boot = &led_blue;
14 led-failsafe = &led_blue;
15 led-running = &led_blue;
16 led-upgrade = &led_blue;
17 };
18
19 memory@0 {
20 device_type = "memory";
21 reg = <0x0 0x10000000>;
22 };
23
24 chosen {
25 bootargs = "console=ttyS0,115200";
26 };
27
28 gpio-leds {
29 compatible = "gpio-leds";
30
31 status-red {
32 label = "newifi-d1:red:status";
33 gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
34 };
35
36 status-green {
37 label = "newifi-d1:green:status";
38 gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
39 };
40
41 led_blue: status-blue {
42 label = "newifi-d1:blue:status";
43 gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
44 default-state = "on";
45 };
46 };
47
48 keys {
49 compatible = "gpio-keys-polled";
50 poll-interval = <20>;
51
52 reset {
53 label = "reset";
54 gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
55 linux,code = <KEY_RESTART>;
56 };
57 };
58
59 gpio_export {
60 compatible = "gpio-export";
61 #size-cells = <0>;
62
63 usb2power {
64 gpio-export,name = "usb2power";
65 gpio-export,output = <1>;
66 gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
67 };
68
69 usb3power {
70 gpio-export,name = "usb3power";
71 gpio-export,output = <1>;
72 gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
73 };
74 };
75 };
76
77 &sdhci {
78 status = "okay";
79 };
80
81 &spi0 {
82 status = "okay";
83
84 m25p80@0 {
85 compatible = "mx25l25635f", "jedec,spi-nor";
86 reg = <0>;
87 spi-max-frequency = <25000000>;
88 m25p,fast-read;
89
90 partitions {
91 compatible = "fixed-partitions";
92 #address-cells = <1>;
93 #size-cells = <1>;
94
95 partition@0 {
96 label = "u-boot";
97 reg = <0x0 0x30000>;
98 read-only;
99 };
100
101 partition@30000 {
102 label = "u-boot-env";
103 reg = <0x30000 0x10000>;
104 read-only;
105 };
106
107 factory: partition@40000 {
108 label = "factory";
109 reg = <0x40000 0x10000>;
110 read-only;
111 };
112
113 partition@50000 {
114 compatible = "denx,uimage";
115 label = "firmware";
116 reg = <0x50000 0x1fb0000>;
117 };
118 };
119 };
120 };
121
122 &pcie {
123 status = "okay";
124 };
125
126 &pcie0 {
127 mt76@0,0 {
128 reg = <0x0000 0 0 0 0>;
129 mediatek,mtd-eeprom = <&factory 0x8000>;
130 ieee80211-freq-limit = <5000000 6000000>;
131 };
132 };
133
134 &pcie1 {
135 mt76@0,0 {
136 reg = <0x0000 0 0 0 0>;
137 mediatek,mtd-eeprom = <&factory 0x0000>;
138 };
139 };
140
141 &ethernet {
142 mtd-mac-address = <&factory 0xe000>;
143 };
144
145 &pinctrl {
146 state_default: pinctrl0 {
147 gpio {
148 ralink,group = "wdt", "rgmii2", "jtag", "uart2", "uart3", "i2c";
149 ralink,function = "gpio";
150 };
151 };
152 };