ramips: update device tree source files
[openwrt/staging/wigyori.git] / target / linux / ramips / dts / OY-0001.dts
1 /dts-v1/;
2
3 #include "mt7620a.dtsi"
4
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
7
8 / {
9 compatible = "ohyeah,oy-0001", "ralink,mt7620a-soc";
10 model = "OY-0001";
11
12 chosen {
13 bootargs = "console=ttyS0,115200";
14 };
15
16 gpio-leds {
17 compatible = "gpio-leds";
18
19 powerled {
20 label = "oy-0001:green:power";
21 gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
22 };
23
24 wifiled {
25 label = "oy-0001:green:wifi";
26 gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
27 };
28 };
29
30 gpio-keys-polled {
31 compatible = "gpio-keys-polled";
32 #address-cells = <1>;
33 #size-cells = <0>;
34 poll-interval = <20>;
35
36 s1 {
37 label = "reset";
38 gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
39 linux,code = <KEY_RESTART>;
40 };
41 };
42 };
43
44 &gpio2 {
45 status = "okay";
46 };
47
48 &gpio3 {
49 status = "okay";
50 };
51
52 &spi0 {
53 status = "okay";
54
55 m25p80@0 {
56 #address-cells = <1>;
57 #size-cells = <1>;
58 compatible = "jedec,spi-nor";
59 reg = <0>;
60 spi-max-frequency = <10000000>;
61
62 partition@0 {
63 label = "u-boot";
64 reg = <0x0 0x30000>;
65 read-only;
66 };
67
68 partition@30000 {
69 label = "u-boot-env";
70 reg = <0x30000 0x10000>;
71 read-only;
72 };
73
74 factory: partition@40000 {
75 label = "factory";
76 reg = <0x40000 0x10000>;
77 read-only;
78 };
79
80 partition@50000 {
81 label = "firmware";
82 reg = <0x50000 0xfb0000>;
83 };
84 };
85 };
86
87 &pinctrl {
88 state_default: pinctrl0 {
89 gpio {
90 ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "nd_sd";
91 ralink,function = "gpio";
92 };
93 };
94 };
95
96 &ethernet {
97 pinctrl-names = "default";
98 pinctrl-0 = <&ephy_pins>;
99 mediatek,portmap = "llllw";
100 };
101
102 &gsw {
103 mediatek,port4 = "ephy";
104 };
105
106 &wmac {
107 ralink,mtd-eeprom = <&factory 0>;
108 };
109
110 &sdhci {
111 status = "okay";
112 };
113
114 &ehci {
115 status = "okay";
116 };
117
118 &ohci {
119 status = "okay";
120 };
121
122 &pcie {
123 status = "okay";
124 };