c973d1dffb780f1fb99d271dc0c4c8d5c48375a9
[openwrt/staging/wigyori.git] / target / linux / ramips / dts / R6120.dts
1 /dts-v1/;
2
3 #include "mt7628an.dtsi"
4
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
7
8 / {
9 compatible = "netgear,r6120", "mediatek,mt7628an-soc";
10 model = "Netgear R6120";
11
12 aliases {
13 led-boot = &led_power;
14 led-failsafe = &led_power;
15 led-running = &led_power;
16 led-upgrade = &led_power;
17 };
18
19 memory@0 {
20 device_type = "memory";
21 reg = <0x0 0x4000000>;
22 };
23
24 keys {
25 compatible = "gpio-keys-polled";
26 poll-interval = <20>;
27
28 reset {
29 label = "reset";
30 gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
31 linux,code = <KEY_RESTART>;
32 };
33 };
34
35 gpio-leds {
36 compatible = "gpio-leds";
37
38 lan {
39 label = "r6120:green:lan";
40 gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
41 };
42
43 led_power: power {
44 label = "r6120:green:power";
45 gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
46 };
47
48 wlan {
49 label = "r6120:green:wlan2g";
50 gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
51 };
52
53 wlan_orange {
54 label = "r6120:orange:wlan2g";
55 gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
56 };
57
58 wlan5 {
59 label = "r6120:green:wlan5g";
60 gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
61 };
62
63 wlan5_orange {
64 label = "r6120:orange:wlan5g";
65 gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
66 };
67 };
68 };
69
70 &pinctrl {
71 state_default: pinctrl0 {
72 gpio {
73 ralink,group = "p0led_an", "p1led_an", "p2led_an",
74 "p3led_an", "p4led_an", "wdt", "wled_an";
75 ralink,function = "gpio";
76 };
77 };
78 };
79
80 &spi0 {
81 status = "okay";
82
83 flash@0 {
84 compatible = "jedec,spi-nor";
85 reg = <0>;
86 spi-max-frequency = <10000000>;
87 m25p,chunked-io = <32>;
88
89 partitions {
90 compatible = "fixed-partitions";
91 #address-cells = <1>;
92 #size-cells = <1>;
93
94 partition@0 {
95 label = "u-boot";
96 reg = <0x0 0x40000>;
97 read-only;
98 };
99
100 factory: partition@40000 {
101 label = "factory";
102 reg = <0x40000 0x20000>;
103 read-only;
104 };
105
106 nvram: partition@60000 {
107 label = "nvram";
108 reg = <0x60000 0x30000>;
109 read-only;
110 };
111
112 partition@90000 {
113 compatible = "denx,uimage";
114 label = "firmware";
115 reg = <0x90000 0xf60000>;
116 };
117
118 partition@ff0000 {
119 label = "reserved";
120 reg = <0xff0000 0x10000>;
121 read-only;
122 };
123 };
124 };
125 };
126
127 &wmac {
128 status = "okay";
129 mtd-mac-address = <&nvram 0x100b0>;
130 mediatek,mtd-eeprom = <&factory 0x20000>;
131 };
132
133 &ethernet {
134 mtd-mac-address = <&nvram 0x100b0>;
135 };
136
137 &pcie {
138 status = "okay";
139 };
140
141 &pcie0 {
142 wifi@0,0 {
143 reg = <0x0000 0 0 0 0>;
144 mediatek,mtd-eeprom = <&factory 0x28000>;
145 ieee80211-freq-limit = <5000000 6000000>;
146 mtd-mac-address = <&nvram 0x100b0>;
147 mtd-mac-address-increment = <(2)>;
148 };
149 };