target/linux/ramips/dts/RE6500.dts

   1 /dts-v1/;
   2
   3 #include "mt7621.dtsi"
   4
   5 / {
   6         compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc";
   7         model = "Linksys RE6500";
   8
   9         memory@0 {
  10                 device_type = "memory";
  11                 reg = <0x0 0x4000000>;
  12         };
  13
  14         chosen {
  15                 bootargs = "console=ttyS0,57600";
  16         };
  17
  18         gpio-leds {
  19                 compatible = "gpio-leds";
  20
  21                 wifi {
  22                         label = "re6500:orange:wifi";
  23                         gpios = <&gpio0 0 0>;
  24                 };
  25
  26                 power {
  27                         label = "re6500:white:power";
  28                         gpios = <&gpio0 9 0>;
  29                 };
  30         };
  31
  32         gpio-keys-polled {
  33                 compatible = "gpio-keys-polled";
  34                 #address-cells = <1>;
  35                 #size-cells = <0>;
  36                 poll-interval = <20>;
  37
  38                 wps {
  39                         label = "wps";
  40                         gpios = <&gpio0 10 1>;
  41                         linux,code = <0x211>;
  42                 };
  43
  44                 reset {
  45                         label = "reset";
  46                         gpios = <&gpio0 11 0>;
  47                         linux,code = <0x198>;
  48                 };
  49         };
  50 };
  51
  52 &spi0 {
  53         status = "okay";
  54
  55         m25p80@0 {
  56                 #address-cells = <1>;
  57                 #size-cells = <1>;
  58                 compatible = "jedec,spi-nor";
  59                 reg = <0 0>;
  60                 linux,modalias = "m25p80", "en25q64";
  61                 spi-max-frequency = <10000000>;
  62
  63                 partition@0 {
  64                         label = "u-boot";
  65                         reg = <0x0 0x30000>;
  66                         read-only;
  67                 };
  68
  69                 partition@30000 {
  70                         label = "u-boot-env";
  71                         reg = <0x30000 0x10000>;
  72                         read-only;
  73                 };
  74
  75                 factory: partition@40000 {
  76                         label = "factory";
  77                         reg = <0x40000 0x10000>;
  78                         read-only;
  79                 };
  80
  81                 partition@50000 {
  82                         label = "firmware";
  83                         reg = <0x50000 0x7b0000>;
  84                 };
  85         };
  86 };
  87
  88 &pinctrl {
  89         state_default: pinctrl0 {
  90                 gpio {
  91                         ralink,group = "i2c", "uart2", "uart3", "rgmii2";
  92                         ralink,function = "gpio";
  93                 };
  94         };
  95 };
  96
  97 &pcie {
  98         status = "okay";
  99
 100         pcie0 {
 101                 mt76@0,0 {
 102                         reg = <0x0000 0 0 0 0>;
 103                         device_type = "pci";
 104                         mediatek,mtd-eeprom = <&factory 0x0000>;
 105                         mediatek,2ghz = <0>;
 106                 };
 107         };
 108
 109         pcie1 {
 110                 mt76@1,0 {
 111                         reg = <0x0000 0 0 0 0>;
 112                         device_type = "pci";
 113                         mediatek,mtd-eeprom = <&factory 0x8000>;
 114                         mediatek,5ghz = <0>;
 115                 };
 116         };
 117 };
 118
 119 &ethernet {
 120         mtd-mac-address = <&factory 0x2e>;
 121 };