02af05d0c99e7e80971f2cdd2e95f8507c1b2942
[openwrt/staging/wigyori.git] / target / linux / ramips / dts / SAP-G3200U3.dts
1 /dts-v1/;
2
3 #include "mt7621.dtsi"
4
5 / {
6 compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc";
7 model = "STORYLiNK SAP-G3200U3";
8
9 memory@0 {
10 device_type = "memory";
11 reg = <0x0 0x8000000>;
12 };
13
14 chosen {
15 bootargs = "console=ttyS0,57600";
16 };
17
18 gpio-leds {
19 compatible = "gpio-leds";
20
21 usb {
22 label = "sap-g3200u3:green:usb";
23 gpios = <&gpio0 13 1>;
24 };
25 };
26
27 gpio-keys-polled {
28 compatible = "gpio-keys-polled";
29 #address-cells = <1>;
30 #size-cells = <0>;
31 poll-interval = <20>;
32
33 reset {
34 label = "reset";
35 gpios = <&gpio0 16 1>;
36 linux,code = <0x198>;
37 };
38
39 rfkill {
40 label = "rfkill";
41 gpios = <&gpio0 14 1>;
42 linux,code = <0xf7>;
43 };
44 };
45 };
46
47 &spi0 {
48 status = "okay";
49
50 m25p80@0 {
51 #address-cells = <1>;
52 #size-cells = <1>;
53 compatible = "jedec,spi-nor";
54 reg = <0 0>;
55 linux,modalias = "m25p80", "en25q64";
56 spi-max-frequency = <10000000>;
57
58 partition@0 {
59 label = "u-boot";
60 reg = <0x0 0x30000>;
61 read-only;
62 };
63
64 partition@30000 {
65 label = "u-boot-env";
66 reg = <0x30000 0x1000>;
67 read-only;
68 };
69
70 partition@31000 {
71 label = "config";
72 reg = <0x31000 0xf000>;
73 read-only;
74 };
75
76 factory: partition@40000 {
77 label = "factory";
78 reg = <0x40000 0x10000>;
79 read-only;
80 };
81
82 partition@50000 {
83 label = "firmware";
84 reg = <0x50000 0x7b0000>;
85 };
86 };
87 };
88
89 &pcie {
90 status = "okay";
91
92 pcie0 {
93 mt76@0,0 {
94 reg = <0x0000 0 0 0 0>;
95 device_type = "pci";
96 mediatek,mtd-eeprom = <&factory 0x8000>;
97 mediatek,2ghz = <0>;
98 };
99 };
100
101 pcie1 {
102 mt76@1,0 {
103 reg = <0x0000 0 0 0 0>;
104 device_type = "pci";
105 mediatek,mtd-eeprom = <&factory 0x0000>;
106 mediatek,5ghz = <0>;
107 };
108 };
109 };
110
111 &ethernet {
112 mtd-mac-address = <&factory 0xe006>;
113 };
114
115 &pinctrl {
116 state_default: pinctrl0 {
117 gpio {
118 ralink,group = "uart3", "jtag";
119 ralink,function = "gpio";
120 };
121 };
122 };