45b028a1b50ccb23e538adeb3d3706cdeb361f0f
[openwrt/staging/wigyori.git] / target / linux / ramips / dts / SKW92A.dts
1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
2 /dts-v1/;
3
4 #include "mt7628an.dtsi"
5
6 #include <dt-bindings/gpio/gpio.h>
7 #include <dt-bindings/input/input.h>
8
9 /{
10 compatible = "skylab,skw92a", "mediatek,mt7628an-soc";
11 model = "SKYLAB SKW92A";
12
13 aliases {
14 led-boot = &led_power;
15 led-failsafe = &led_power;
16 };
17
18 chosen {
19 bootargs = "console=ttyS0,57600";
20 };
21
22 memory@0 {
23 device_type = "memory";
24 reg = <0x0 0x4000000>;
25 };
26
27 gpio-leds {
28 compatible = "gpio-leds";
29
30 led_power: wps {
31 label = "skw92a:green:wps";
32 gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
33 };
34
35 wlan {
36 label = "skw92a:green:wlan";
37 gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
38 };
39 };
40
41 keys {
42 compatible = "gpio-keys-polled";
43 poll-interval = <20>;
44
45 reset {
46 label = "reset";
47 gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
48 linux,code = <KEY_RESTART>;
49 };
50 };
51 };
52
53 &pinctrl {
54 state_default: pinctrl0 {
55 gpio {
56 ralink,group = "wdt", "refclk", "wled_an";
57 ralink,function = "gpio";
58 };
59 };
60 };
61
62 &ethernet {
63 mtd-mac-address = <&factory 0x28>;
64 };
65
66 &wmac {
67 status = "okay";
68 ralink,mtd-eeprom = <&factory 0x0>;
69 };
70
71 &spi0 {
72 status = "okay";
73
74 flash@0 {
75 compatible = "jedec,spi-nor";
76 reg = <0>;
77 spi-max-frequency = <10000000>;
78 m25p,chunked-io = <32>;
79
80 partitions {
81 compatible = "fixed-partitions";
82 #address-cells = <1>;
83 #size-cells = <1>;
84
85 partition@0 {
86 label = "u-boot";
87 reg = <0x0 0x30000>;
88 read-only;
89 };
90
91 partition@30000 {
92 label = "u-boot-env";
93 reg = <0x30000 0x10000>;
94 read-only;
95 };
96
97 factory: partition@40000 {
98 label = "factory";
99 reg = <0x40000 0x10000>;
100 read-only;
101 };
102
103 partition@50000 {
104 label = "firmware";
105 reg = <0x50000 0xfb0000>;
106 compatible = "denx,uimage";
107 };
108 };
109 };
110 };
111
112 &uart1 {
113 status = "okay";
114 };
115
116 &ehci {
117 status = "okay";
118 };
119
120 &ohci {
121 status = "okay";
122 };