ralink: add pinctrl driver
[openwrt/staging/wigyori.git] / target / linux / ramips / dts / TEW-691GR.dts
1 /dts-v1/;
2
3 /include/ "rt3883.dtsi"
4
5 / {
6 compatible = "TEW-691GR", "ralink,rt3883-soc";
7 model = "TRENDnet TEW-691GR";
8
9 palmbus@10000000 {
10 gpio1: gpio@638 {
11 status = "okay";
12 };
13 };
14
15 pinctrl {
16 state_default: pinctrl0 {
17 gpio {
18 ralink,group = "spi", "i2c", "jtag", "uartf";
19 ralink,function = "gpio";
20 };
21 };
22 };
23
24 ethernet@10100000 {
25 port@0 {
26 phy-handle = <&phy0>;
27 phy-mode = "rgmii";
28 };
29 mdio-bus {
30 status = "okay";
31
32 phy0: ethernet-phy@0 {
33 reg = <0>;
34 };
35 };
36 };
37
38 wmac@10180000 {
39 ralink,5ghz = <0>;
40 };
41
42 nor-flash@1c000000 {
43 compatible = "cfi-flash";
44 reg = <0x1c000000 0x800000>;
45
46 bank-width = <2>;
47 #address-cells = <1>;
48 #size-cells = <1>;
49
50 partition@0 {
51 reg = <0x0 0x0030000>;
52 label = "u-boot";
53 read-only;
54 };
55
56 partition@30000 {
57 reg = <0x00030000 0x00010000>;
58 label = "u-boot-env";
59 read-only;
60 };
61
62 partition@40000 {
63 reg = <0x00040000 0x00010000>;
64 label = "factory";
65 read-only;
66 };
67
68 partition@50000 {
69 reg = <0x00050000 0x007b0000>;
70 label = "firmware";
71 };
72 };
73
74 gpio-keys-polled {
75 compatible = "gpio-keys-polled";
76 #address-cells = <1>;
77 #size-cells = <0>;
78 poll-interval = <100>;
79 reset {
80 label = "reset";
81 gpios = <&gpio0 10 1>;
82 linux,code = <0x198>;
83 };
84 wps {
85 label = "wps";
86 gpios = <&gpio1 2 1>;
87 linux,code = <0x211>;
88 };
89 rfkill {
90 label = "rfkill";
91 gpios = <&gpio0 0 1>;
92 linux,code = <0xf7>;
93 };
94 };
95
96 gpio-leds {
97 compatible = "gpio-leds";
98 wps {
99 label = "trendnet:green:wps";
100 gpios = <&gpio0 9 1>;
101 };
102 };
103 };