target/linux/ramips/dts/TEW-692GR.dts

   1 /dts-v1/;
   2
   3 #include "rt3883.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "trendnet,tew-692gr", "ralink,rt3883-soc";
  10         model = "TRENDnet TEW-692GR";
  11
  12         aliases {
  13                 led-boot = &led_wps_green;
  14                 led-failsafe = &led_wps_green;
  15                 led-running = &led_wps_green;
  16                 led-upgrade = &led_wps_green;
  17         };
  18
  19         nor-flash@1c000000 {
  20                 compatible = "cfi-flash";
  21                 reg = <0x1c000000 0x800000>;
  22                 bank-width = <2>;
  23
  24                 partitions {
  25                         compatible = "fixed-partitions";
  26                         #address-cells = <1>;
  27                         #size-cells = <1>;
  28
  29                         partition@0 {
  30                                 reg = <0x0 0x0030000>;
  31                                 label = "u-boot";
  32                                 read-only;
  33                         };
  34
  35                         partition@30000 {
  36                                 reg = <0x00030000 0x00010000>;
  37                                 label = "u-boot-env";
  38                                 read-only;
  39                         };
  40
  41                         factory: partition@40000 {
  42                                 reg = <0x00040000 0x00010000>;
  43                                 label = "factory";
  44                                 read-only;
  45                         };
  46
  47                         partition@50000 {
  48                                 compatible = "denx,uimage";
  49                                 reg = <0x00050000 0x007b0000>;
  50                                 label = "firmware";
  51                         };
  52                 };
  53         };
  54
  55         gpio-keys-polled {
  56                 compatible = "gpio-keys-polled";
  57                 poll-interval = <100>;
  58
  59                 reset {
  60                         label = "reset";
  61                         gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
  62                         linux,code = <KEY_RESTART>;
  63                 };
  64
  65                 wps {
  66                         label = "wps";
  67                         gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
  68                         linux,code = <KEY_WPS_BUTTON>;
  69                 };
  70         };
  71
  72         gpio-leds {
  73                 compatible = "gpio-leds";
  74
  75                 wps {
  76                         label = "tew-692gr:orange:wps";
  77                         gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
  78                 };
  79
  80                 led_wps_green: wps2 {
  81                         label = "tew-692gr:green:wps";
  82                         gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
  83                 };
  84         };
  85 };
  86
  87 &gpio1 {
  88         status = "okay";
  89 };
  90
  91 &pinctrl {
  92         state_default: pinctrl0 {
  93                 gpio {
  94                         ralink,group = "spi", "i2c", "jtag", "uartf";
  95                         ralink,function = "gpio";
  96                 };
  97         };
  98 };
  99
 100 &ethernet {
 101         status = "okay";
 102         mtd-mac-address = <&factory 0x4>;
 103
 104         port@0 {
 105                 phy-handle = <&phy0>;
 106                 phy-mode = "rgmii";
 107         };
 108
 109         mdio-bus {
 110                 status = "okay";
 111
 112                 phy0: ethernet-phy@0 {
 113                         reg = <0>;
 114                         phy-mode = "rgmii";
 115
 116                         qca,ar8327-initvals = <
 117                                 0x04 0x07600000 /* PORT0 PAD MODE CTRL */
 118                                 0x0c 0x07600000 /* PORT6 PAD MODE CTRL */
 119                                 0x10 0x40000000 /* Power-on Strapping: 176-pin interface configuration */
 120                                 0x50 0xc437c437 /* LED Control Register 0 */
 121                                 0x54 0xc337c337 /* LED Control Register 1 */
 122                                 0x58 0x00000000 /* LED Control Register 2 */
 123                                 0x5c 0x03ffff00 /* LED Control Register 3 */
 124                                 0x7c 0x0000007e /* PORT0_STATUS */
 125                                 0x94 0x0000007e /* PORT6 STATUS */
 126                         >;
 127                 };
 128         };
 129 };
 130
 131 &pci {
 132         status = "okay";
 133 };
 134
 135 &pci1 {
 136         status = "okay";
 137
 138         wifi@0,0 {
 139                 compatible = "pci0,0";
 140                 reg = < 0x10000 0 0 0 0 >;
 141                 ralink,2ghz = <0>;
 142         };
 143 };
 144
 145 &wmac {
 146         status = "okay";
 147         ralink,mtd-eeprom = <&factory 0x0>;
 148         ralink,5ghz = <0>;
 149         mtd-mac-address = <&factory 0x4>;
 150         mtd-mac-address-increment = <3>;
 151 };